Separate names with a comma.
Why would there be a pressure drop of that magnitude (50%)?
I took the reading off the racepak. The sensor is in the hat dist block. I understand there would be some pressure drop from the pump to the...
Can someone tell me what my approximate fuel pressure should be with a .900 gear lil bertha with a total area for nozzles at .040345 and a total...
Does anyone know the weight of a PSI Deep Throat with the lip? I'm trying to see if it is worth the weight to move to a carbon fiber hat. Thanks
My clutch weight kit is all 1/4 stuff. Just bought a 10.7 Crower an it has 5/16 holes in the levers for counterweight. I'm guessing I should...
We are just getting our Brad back together. Wanted to crank it with a blower starter to check it out. We have not put the clutch or flywheel on...
Just got our PSI screw blower mounted on our BAE 5 hemi. When we turn the motor clockwise (looking at the front of the blower) the belt wants...
I kept about 10 gallons for over 4 years and then used it. It seemed fine. I was told as long as it had not turn green, it should be fine. If...
Wow. 54. Do you know the radius size of that pulley? I calculate it to be 4.75in. Not sure I can cut my pump extension that much. Thanks
On a Brad Hemi with a RCD Fuel pump extension, what is the largest 14mm pulley you can fit on the bottom? It appears that we have just over 4 in...
Does anyone know what the intake and exhaust rockers ratios are on Brad 5 RED Stands Standard?
I see that MSD has discontinued the 8993 Top Fuel Tester. I was told that the 8998 (MSD's standard Ingnition, not Pro Mag) tester would work on...
Mike, Correct me if I wrong, but when the hobbs switch is activated on the second gear change to the Step, the retard is applied and will stay...
Thanks all for the ideas. This weekend we took the rocker arm off and made sure the oiling hole was not pluged. Also, we had a spare rocker and...
We are running BAE Stage 5 Heads with BAE 5 rockers. The number 2 intake rocker adjuster keeps being beat up against the push rod cup area. It's...
I was looking for someone local to grind some disc and floaters for me. Anyone know of someone around Greensboro that could do it for me on short...
Mike, I agree with you there. However, I was talking about the weight on one particular finger. Lets say you have a 6 finger clutch and 72grams...
I know weight is weight, but do you guys balance the nuts and washers so that the weight is equal on both sides of the bolt in the finger? I...
Has anyone cut the bottoms out of their spark plug tubes where the plug would contact the head, instead of the tube? I can see some advantages,...
Thanks Ken. Got the seals locally!
