Separate names with a comma.
Delta Cam in Washington 800-562-5500 does a great job.
Not in Bend Tom Cerillo moved from Bend a few years ago and is now down south were it is warm. The above phone #'s should be good even though...
Tach pick-up The RPM system I got from Randy was for Mallory. He trades out the tach adapter for an induction pick-up that goes on the degree...
The offset drives have a small belt to drive them, I run a pump and the mag off of one. Cam belt drives are driving allot more than a pump also....
We have a KB Olds aluminum block and heads with Jesel rockers - in .012 ex .014 in cold .028 in .030 hot after a warm up with a head temp reading...
Welded rocker stands Send me your e-mail address and I will send you some pictures of my rocker stands that I welded together. I have Alan...
There maybe a different configuration but the two blocks I have are Chevy mains and the crank has Chrysler pins. Give Chris at AJPE a call, he is...
The KB Olds blocks use a Chevy size and style crank, rear thrust. Sorry
I buy it from a piano store. They have it in many diameters. Sells by the foot.
JR at RBS Superchargers has a by-pass hole pin gauge
Belt Drive I use a Jesel belt drive on a KB Olds with a Dunn offset. Mag is in the center with the pump off to the side. Have talked to many guys...
Jody, I just went through this. There are a couple of things that can be done. First you can drill the threads out of the right side exhaust stand...
Mag Repair Check with Spud at http://fuelinjectionent.com/, Fuel Injection Enterprises, He is the best to deal with. Spud will return you message...
I have been told that welding the rocker stands together will stabilize the valve train and prevent the stands and rockers from breaking. I will...
This is in an Anglia, so no room for a crank starter.
I'm looking at purchasing a KB Olds Stage I. Rules dictate self starting. This block has no provisions for a starter. Is there a way to mount a...
