Separate names with a comma.
Same thing happened to me, I wanted the converter place to change the pads to a thinner one but they put the same thickness pads back on. I took...
Are you sure it says Mallory IV or is it VI. A Mallory IV only has 2 wires coming out of it. I have never seen a buzz box that had a charger but I...
I was wrong on the dimensions, it moves it out 4.5" RBS Superchargers has them...
I have a buzzard on a small opening 6-71. I used a I think a Max Air spacer (milled the name off) - moves it up 4" and forward 2.5"
Depends on valve length, cam lift, spring used. Not cylinder head
Where can I get an inline regulator?
That's what I would like to do but how? Hi pressure fittings in the regulators are left hand thread. So running them out of a tee would be tough.
Question. How much air pressure are you running to the trans brake? I just had mine converted from a hydraulic unit to air. I have heard both...
Shifter I use a shifter made by Bill Fitting of Fitting Co. It is electric over air. With mine I use a button to shift, you could hook it up to a...
R&r I run R&R Rods. Mike is great to work with and is a straight shooter. He will spend as much time talking to you as you need. Never had the...
It depends on what head bolt pattern you have. Some are standard BBC and some are called Olds pattern. I have the Olds bolt pattern and some of my...
Timing Are you saying that the cranking compression is irrelevant? If I start out using the manufacturers spec and have 160 psi cranking...
When setting cam timing, is it best to go by what the cam manufacturer recommends or would a better procedure be to set it at the best cranking...
It really depends on what head you are using. It is very hard to help if we don't have enough information. I run 36 degrees on my 456 ci KB Olds...
Battery I use the very small battery that Randy supplies. The battery and logger are in a box the size of a dictionary. I put power switch and on...
Moroso Wires A few years ago I wrote Moroso asking if there Ultra 40 wire would work with a magneto ignition, this is there response. I don't...
There are 3 different types of Rev Limiter that I know of. 2 are electronic Autometer Pro-Control which kills the ignition and has adjustible...
I used a Mallory 250. More than adequate. I am sure you could use a smaller one as long as you are returning to the surge tank.
Tony @ US Transmission I had nothing but problems with Tony at US Transmissions. On his suggestion I updated the pump in my Quickdrive and...
Measurements Converter drive housing - 6 15/16" Chevy powerglide bell with adapter and drive - 14 3/8" It is the same length as the one B&J...
