Separate names with a comma.
Thanks for info guys I will take all on board. Brad
What would most consider to be a safe amount of boost for a small block with the following specs: Iron Block filled to the top. Billet splayed...
Thanks all. System one it is.
What type of oil filter do most use or prefer, the System One style or the Moroso Omni/Oberg style?
Is there a simple way of checking Sptrinkmag and transformer to see if they are working correctly?
Wouldn't the motor sound off if the crank was broken? The motor sound fine when running and I have turned the motor over with no plugs in and the...
Timing I use a Proform light has been fine in the past. I have check everything at least four times e.g. timing mark hasn't moved, mag hasn't...
I run a small block with Mallory Sprint Mag. In the past I set the initial timing by lining the timing mark on the crank with the 24deg timing...
Thanks to all those that replied to my problem. I tried an old set of suppression leads I had and the Tacho seems to be working now. SO thanks...
I will try the suppression wires and see what happens. Do you think I would notice any preformance drop? I have tried to contact both MSD and...
Thanks Dez and Rapid, I have a couple of things to look at now. I have the converter wired in as pre the instructions for a Mallory Mag and I know...
Thanks for your reply Mike. The Tacho worked fine on a normal distributor but with the mag it has never worked correctly. I have the Tacho...
I have a tacho problem I hope someone can help with? I run a Mallory Sprint Mag with 8mm pro wire leads and use a MSD tacho converter which is...
