Separate names with a comma.
The biggest enemy of all tires is heat, underinflation, overloading and speed can all cause overheating. One thing I have often thought about is...
It's time for me to replace my 2 piece SFI-15 suit. In the past I have just bought an "off the shelf" suit, but this time I want to do a custom...
Also for cranks with an extra large radius journals.........
Sorry guys, been offline for a few days. To clarify, the check was set at 26#, but would start leaking slightly at 20-21# I have just changed to...
I was checking my port check setting and noticed that it will leak very slight, starting about 5# before it actually cracks/opens. This is an...
Thanks guys. Mike I have an RPM Performance logger, I talked to Randy there, there is a calibration number on it also.
Gotta picture? If you do that then both hat and port nozzles will get fuel all the time.
I am considering adding a fuel flow sensor to my engine. The question I have is, since there is a line from the Enderle K valve to the hat block...
I plan on giving it a little more this fall, when the conditions are better. I don't plan on going much higher with the boost...........
Went up to 15.4% made 29.9# @ 8000 rpm.
Rockauto X3
Try a Star Racer belt
My latest report, I have stepped up the OD slightly to 13%, it makes 27#@8000 rpm. Car has gone 3.75@2000 lbs.
I'm also wondering if anyone has used the new Enderle pump.
Can you convert to 1/2" head studs?
IMO burning 3 threads if asking for trouble, be careful....... I recently went 3.75@193 in 500' air, 13% OD 27# @2000lbs.
35% sounds like alot to start out, my 14-71 (not a Littlefield) makes 27#@13% on a 540 BBC. Andy should know about your combo with his blower though.
Thanks Mike!
I haven't, but I will....
I agree with Mike. FWIW, I always use a thin layer of silicone around the ports on both sides of the intake gasket to help keep the gasket from...
