Separate names with a comma.
That is about what I figured with the current tune... I think if I get it leaned out and a little better tune on it, it would go in the 7.50's or...
That sounds pretty logical.... I think I might step up on the boost, and then start leaning it out... With the old block, I didnt really trust...
It is around 1800 to 2000 horsepower depending on boost
Putting a set in my new motor.... Are they good? I was running BME 426 Rods before
We run a high speed bypass.... Typically the plugs have 30 to 50 percent of the cadmium burned off
Tell me what you guys think... I am building a new engine, but here are the specs from the last one. My car weighs 2900 pounds with driver......
What are you running for boost, compression, cam, and trans? I am running 360's ported and flowed to 410, 11.5 to 1 compression, 548 cubes,...
I need head studs and nuts for a 481T Rodeck as well... PM me or e-mail me at mx278@metrocast.net if you have them. I also need some pushrods...
Heads look fine... Did have one bent pushrod though.
It is a 70 weight synthetic. I was actually not aware it was a synthetic when I bought it, or I probably wouldnt have used it. I have never run...
We are running a titan oil pump, it is a BB Chevy, it has new screens / filters... etc. It is an automatic car air shifted by rpm activation....
No data logger.... We have a good old fashoned dummy light that comes on at 40#... The light never came on.
We are running 100 pounds plus of oil pressure, and the motor is making around 1700 horsepower. It has been running the same combo for many...
Anyone else have problems with Synergin Oil? Three passes on a brand new motor, and it looks like someone cooked the bearings... Broke two...
I realise that... But is a 14-71 littlefield going to be losing efficiency at 44% I am hoping it wont be that much of a change.
How much ET change should I see at 2800 pounds going from 44% overdrive to 35% overdrive on a 14-71 Littlefield High Helix
How much lighter is a 15x14 Weld Magnum Drag 2.0 compared to an old Centerline Auto Drag ( The solid center wheel ) of the same size?
There has been a few changes made to my car since it was last run and I was in search of opinions on what I should lose or gain in 1/8th mile et....
Here is an old video of the car as it runs now. http://video.google.com/videoplay?docid=-8942364149205447080
I was thinking the same thing... Here is a video of the car going down the track a bunch of years ago... I dont have any new video's. It is...
