Separate names with a comma.
I finally wore the numbers off my old degree wheel. I borrowed a solid 18' dia. wheel. It is very accurate but you can't get to the cam gear...
Backmotor who is your Hoosier dealer. The clown ' excuse me dealer' here in Dallas didn't have a clue what valve stems we needed. Sold us some...
I am not sure but I think a friend of mine has a bunch of old Ram clutch parts. call me if I can help TD 972-977-8340
For what it is worth. Once I was helping a team that had transbrake problems and were forced to leave at an idle. The car produced it's best 60'...
Front page has Pit Buzz without any path/links to get to classifieds or questions. Where are they at or how do you get there. They were on the...
I run 27 degrees with BAE 5 heads
I cut the saddles off and widened my front jacks so they slide on the bottom frame rail. I eliminated the leaks by replacing all the brass...
Older Brad fuel heads. Timing is at 44 degrees
When replacing a Super mag with a Mag 44 are their any guidelines regarding the timing? Do I leave it the same or back off some for the hotter Mag...
At one time or the other I have clearanced the block, the heads, changed the tubes, changed push rods and lifters. That said the simple way to...
I agree with underby6. Go with MTI's the bench model.
I have a neighbor , a retired milk truck delivery man, that buys, sells, and restores those trucks. I you want I will get his phone number for you.
Thanks for the info guys. After my other set of slicks developed a leak between rounds I was forced to use this set. Much to my surprise the car...
For a week I have been over inflating one Hossier slick in an attempt to increase its roll out to match the other. Although it has gotten much...
I want to put a stage light my car. I have a MSD mag 44 with a 8147 box. Looking at MSD's web site it looks like their are various options. It...
Sounds like it is to lean
You need a lot better and bigger blower. Tim Richards told me once "motors run on fuel and air, not compression" I believe him. I would try and...
Thanks the info Justin. I also took your other suggestion and contacted Dennis at DZE nice guy, he took care of my clutch machine issues.
I would like to purchase a bench mounted hardness tester to check clutch disc. But I don't have a clue what I should be looking for ie; brands,...
The tach has about two dozen runs on it. A couple of witch it shook pretty hard.
