Separate names with a comma.
Well we think we've cracked it. The two extra crank drillings which we found on main journals 2 and 4 we decided to blank off and also...
rb: If i do find out then of course i'll post up, as i'm all for making a nice knowledge base for everyone to have. As for changes to the oil...
Graham: It's all fine and well when the pressure comes back when you rev the motor, but with ours in the current state it's in, it doesn't....
i'm assuming by the lack of replies that no one really knows about the KB crankshafts and the extra drillings. I'll get in touch with Ken...
Hi guys, we think we have made a possible breakthrough. After making some observations and checking all the main caps and lines, we went to...
Hi Darren: We have had the oil pump apart, and originally thought that maybe the relief was relieving too early and too much, thus causing the...
Okay let me answer these questions: Hi Darren, we are using a Olsen style pan with about 2 gallon (8 quarts) of oil. We've used the same amount...
Don: We don't run any on board computers, we are simply using some pressure gauges (Autometer 200lb pressure gauge is what we use). As for...
Hi Dave. We are using Shell Racing Ultra 10/60W, which we've used in our engines since 2000 or so and never ever encountered a issue like this...
Hi guys. Bit of a question thats got the crew scratching our collective heads. We acquired a KB Stage VI block and can't get to the bottom...
Hi Brandon. I tried to contact you via private messages regarding your PSI injector hat but your inbox was full. If you still have it can you send...
Hi guys. Clevite stock both 'M' and 'V' rated CB-1512 rod bearings. We ran a forged crank with 'V' rod bearings for many years with no issues...
Hey all. After nuking my motor after a successful Easter weekend where I demolished more than just my PB's, I also annihilated a KB block by...
I've worn both 2 and 1 piece suits and I have to say the 1 piece is the most comfortable for me. I have a 1 piece -20 stroud suit and it's been...
If you look on this page: Hemi piston information The list is from Brendan Murrays site, gives you information about different pistons,...
5.150" Is that from centre of the crank to centre of the cam? Just to be sure :)
Apologies, should have put that in the original post. Standard deck, standard cam.
Hi guys. Just wondered if anyone knew what is meant to be the proper distance between centre-lines of the Crank and Cam on a KB hemi block?...
With all the talk of modern carbon fibre hats flowing really impressive figures, what is the best flowing non composite hat? Things like...
Hi guys. Had no luck getting in touch with Keith Black regarding the saddles and main caps. Considering buying second hand; but would it be...
