Separate names with a comma.
It is a bearing with insert to size correctly for input shaft. Will I get away with using a fully sealed bearing that has plastic type seals?...
Appreciated guys, current clearance is .075 on input shaft to crank in top gear.
I thought I didnt have a problem, but now I do. Using a single sided sheilded bearing in a triple disk promod. We are chewing up bearings from...
We are running a AJPE older wedge motor with a PSI srew atop. Using a RCD front crank support and iron front 1/2" stud main cap (2 only). I have...
Thanks guys. When diagnoising the problem, the rotor phasing wasnt the problem, I had a leed hooked straight up to the coil with a MSD test plug...
I think I just learnt the hard way the 8973 doesnt like to have any start retard programed in. Engine wouldnt make any spark, remove start retard...
Highly reccommend Jerry Bickels book on chassis tuning, his logic is well tested and works for many. cheers
Dumb questions; 1. Are we putting enough fuel in it now that you are burning it with good ignition? If in dought tip more in. 2. What are...
Currently running a AJPE Stage 3 Olds with a RCD crank support and RCD V drive. We run a MSD 44 off one of the V's, Waterman big berther of the...
please describe or send pictures of your happy plugs. Sometimes when you only change the head flow it doesnt mean that anymore air and fuel...
Warren and Brown wrenches I think come out of the UK. To add to Mike's tech comments: Most fasteners are held tight or retain their torque...
Sounds familer if bolts are in the bottom of pan or with alloy around threads but pulled out or semi pulled out of hole. We have had issues with...
Kiwi's may be behind the times and are not known to having very readable place names, and are known to have the number "8" wire attitude, La could...
Cert issue only applies in US. Whereas most parts of the rest of the world its not a issue and is still very saleable. P
Anyone heard of the 2 stage throw bearings that the Aussies are using in Alcohol funny cars and pro mods? Who is making these? Is anyone using...
We run the 1.094 in the Funny car and pro mod. Cant reccommend the best brand but run a fairly heavy tool steel pin and check regulary if you are...
MSD advise to run additional clamp, seen mags move on setups without one almost every time.
Can you hear wear the leak is coming from? Open the injector does the hissing come from there. At the end of each exhaust pipe? Its important to...
Sorry should read shelf, (bit late)
Anyone got the time to send some photos that might not be of the self, I am just as interested as Paul P
