Separate names with a comma.
AJ HEads Yes big differences and no interchangeably from a Stage 1 etc for manifold and intake hole spacing. Chris at AJPE is the subject matter...
bearings What sort of clearance, oil pressure and RPM are you pulling
Lifter issue How stiff are your pushrods? Need to be .160+ wall thickness. Run crower BBC lifters to 10,000+ with a scew blower, no problems.
Oil pressure What sort of oil pressure and type of oil do you run
Testing fluid I have found that the guys using fluids that closely match the specific gravity of alcohol keep it close to their chest of what it...
Evening, contact Brandon below on this site, excellent service has the tools you are looking for. Brought the same tools you are asking about....
Fine v coarse Fine spline is a tougher / durable box in my limited expirence, and possibly easier for obtaining parts
Power Grid Besides the basic unit itself (7730), what other MSD items do you need to make it all work for a MSD 44.
pressures Along the same theme, is there a difference in using Co2 compared to compressed air or nitrogen. Is the potentially a problem with Co2...
I think what he means is use your rachet that you would normally use turn the motor over with when checking valve lash etc, but rachet the motor...
Calling all contacts, Im told, but cant confirm that Brooks has closed their doors? Or am I just late on the pickup cause as we are down under....
Jerry Bickel book is a good starting point, there is a lot more to it than meets the eye, but worth every bit of the set up once you are dialed...
Evening, I am trying to help out friend with 16-71 Hi helix sitting on a BAE 5 heads 526ci with 4.5 crank. Thinking of turning blower around...
Definatley seperate
Is cross over switch wired in correctly? Does it do the same bypassing crossover switch with trigger in Mag only
What timing are you running, with what sort of mag. Do you have data system What sort of converter stall/ tightness launch style What is shift...
When I run fresh mineral based 60wt, oil pressure is around 160psi at idle and go's through the traps 180 odd. Switched to synthetic pressure...
I used any old toggle switch as its only straight 12 volts that operates the relay. The relay is the important bit when it comes to handling the...
Thanks for the help guys. I installed a double sealed plastic type cover bearing. I figure that the dust is getting in so i will keep the grease...
Its very gritty while its turns by hand, in fact when first pulled out it hardley turned at all, only after cleaning. cheers
