Separate names with a comma.
I used to run a super mag with a psi rev limiter and blew up my motor due to over revving.The best way to limit rpms on a super mag is a rpm...
Yes.What type of ignition are you running?
Will the lowering or raising the pump loop jet raise system pressure.Whenever i have to fatten the motor alot and take boost away i can feel my...
I love mine.Randy is a great guy to deal with. www.rpmperf.com 405-495-0454 Get one!
I had the same symptoms as you Dave and after an extensive diagnostic procedure.I found the fuel pump inlet hose was getting sucked closed on the...
You will need a mag signal to tack converter and a rpm activated switch.
I have started it at a Christmas parade when it was about 35* and it still lit right up.I do understand why it would be a lot harder to get it to...
Gas is for washing parts and 2 strokes.I prime my deal with alcohol and a little electric pump.I welded in a bung on the bottom of the fuel tank...
I think I would lean the front two.If it is to much fuel and its squashing the bearings,I would think it will get worse if you add more fuel.Just...
I have a dart big m with brodix solid heads and a 1471hh.I am running the r5671a-9 ngk plug.I have good luck is this the correct plug for my...
I use the bolts and have had great luck.
That seems like a pretty mello tune.I would go atleast 50 passes inspecting them every 5 passes.I run a dart big m block with c&a rods with a...
I have been running rubber hat and port nozzle hoses and want to change to stainless.Will they flow the same as the rubber hoses.Its on a 1471 hh...
Thank you!!!
I have a 6" dunn mag drive with a 20 amp mag.I was wondering how long the little belt is good for and where to buy some.I have been racing this...
I put rpm performance data logger on my blown alcohol hydro and love it.The guy knows his sh!t.He will custome make one with whatever you want for...
Use a mag to tach signal converter with a rpm activated switch to activate the msd relay that will give the + side of the coil ground when it...
I run 75-90 valvoline sythetic and have never had a problem.
I have one on my blown alcohol hydro and love it.It works great and the few problems I had with it Randy fixed in record time.Its well worth the...
I would reccomend getting your o-rings in the heads before adding any more boost.
