Separate names with a comma.
Congratulations to Ryan Hill who finished his lic runs at rt66 sat,he is the driver for Moldenhauer Racing LLC. Along with Elwood and Dave,Rick...
Your on the ball like a crab!!!!!!!
I think my problem was answered with a k valve out of wack,washing the cyl walls creating the white smoke.But how it gets back into the intake...
THANKS TOM and ITA
468 BBC dart block dart heads littlefield manifold,1471 blower,I just finished installing 1/8" intake gasets.Checked the ports and found no gap on...
Dude this sounds like my problem,what did you find with your fuel problem,and what was the color of your smoke?If you want I would like to talk to...
The motor is without coolant, The top lube is the recomended dilution per mfg. this oil is clear.the oil that is in the top end is Brad Penn...
The gaskets are not blown out,the bottom of the gasket which is on the head (intake opening) is wet,the entire floor of the manifold is wet. I...
Mark thank you for the response,the adapter is a set back plate for the blower,as I stated in previous post only change this year are Total seal...
This is really starting to piss me off,I started my motor today within 20 seconds white smoke filled the shop.Pulled the blower,adapter,and...
Can I tee off after the boost memory?
My boost gauge is o at idle,where would the best location for a vacum port to install a gauge? You definitly have my curiosity!
Mike the oil is Brad Penn (green) oil level in blower is ok.I changed gaskets yesterday and all is good for now, I like to proact not react,so any...
When I pulled the blower off I noticed a lite film of oil on the floor of the manifold and intake port.Like I said befor, the intake the only...
The reason for my inquiry is after two passes we blew out the intake gaskets and began sucking oil into the intake ports from the valley.The only...
I figured the title would get your attention,blown BBC does anyone run a vacum pump on blower motors and if you do what type electric or belt...
45 insde 6 outer
Im asking this for my friend,BBC front timing cover built by Summers Bros with a magneto drive. The .engine has a timing chain in it now, looking...
With hydraulics you must eliminate components by testing. The first is install a pressure gauge after the pump, if this is good then go to the...
For what its worth contact SFI and request a spec sheet for what you need certified.It will cost a few bucks but well worth the $. This is also a...
