Separate names with a comma.
Looking for a Waterman Lil' Bertha fuel pump 34+ gpm (1.5" gear set). 3/8" hex drive.
Guys who are flowing fuel systems. I know it's very common on supercharged combinations. What (if any) are the differences in how you flow a...
I believe this is what happened, but was hoping to double check pump, but after getting the motor apart, we were very lucky. It slightly scored 2...
Is there anyone in the midwest who can flow a fuel pump quickly? Hurt a couple of pistons this weekend and need to make sure it was driver error...
If you have the measurements of the rings Seal Tec out of Illinois can build them. 630-692-0633
Clamp the flange down to a solid piece (like a piece of I-beam that you milled smooth on the top or a piece of thick aluminum) and you will not...
http://www.brushresearch.com/brushes.php?c1=2
I think you will hear 5 guys say run it to .050" or so from coil bind and 5 that say looser is fine if you talk to 10 different people. We had a...
How far is "too far" away from coil bind at max open on valve train? Running Manley Nextech series valve springs. 410 lbs seat pressure at...
I am using them on all of my nozzles. My idles are .042, 2nd stage is .060, and 3rd stage .072. Thank you for the information. Currently my...
I was told this weekend by several people that these Enderle 90 degree fuel line fittings are known for causing restriction and the 90 degree bend...
Have ran the SFI 23.1 spec burst panel to 137 lbs boost and the burst panel didn't blow (although I will be changing it to be sure it doesn't fail...
Be sure your piston to valve clearance is proper as well. Gets very expensive in a hurry if it's not! [IMG]
Thanks guys, called into ARP this morning first thing and got what I needed coming! Duane, yes that would be me. Not cars, tractor pulling,...
Jason, I will give them a call tomorrow. The "tech" I got put through to the first time I called looking for these sizes was absolutely no help...
Well after scouring Jegs & Summit Racing I thought I had what I needed for the correct part numbers for several studs that I needed. Does anyone...
I run a Peterson oil tank heater in my dry sump tank (it is a 300 watt unit). I always preheat my oil before starting it. I usually preheat it...
I run a ground wire from the head to the block, distributor to block, and then from the block to the chassis as well. I don't know if it makes a...
Some people have had actual luck getting lifters from Cam FX? I order a set back in the middle of November and was told it would take 2 weeks...
