Separate names with a comma.
thx jp, so I take it most machine shops carry the equipment needed to do this?
thx don, can u give me some details on how it done or what the machinist should watch out for. not too many good ones around here. thx
thx mike, the meat around both pin holes are .400, need to take out .068 thou. to fit the 1.156 pins to use the pistons.
hi was wondering if you can drill out the rod pin hole to another size with aluminum rods? have good pistons in a 1.156 pin size, but my new rods...
hi anybody here willing to do a how to video on tear down, inspection of all parts and block, along with putting the engine back together, as well...
can u post a link to that vid. thx
hi jerry, my bud has 7.1 rod length. think .080 thick gasket
sorry guys, have a bore size og 4.530, but pretty sure rod lenght is 6.8 or 6.7 oliver billets.
hi what spec of pistons will I need for this combo, its a 10.200 rodeck alum 481 block, 4.5 stroke crank, 6.8 lenght rods. have dart alum 320 cc...
also with steel rods, bigger stroke are hurtful to engines. or keep the rpms down.
thx steve, have an old digger myself 69 don long ex top fueler, out of minnesota area. still have all the old tags welded on it from the...
hi wanted to know where is the best place to buy mallory metal. needs to do 2 cranks with steel rods, so 6 to 8 pieces or can you buy a small...
they are, but wouldnt take a chance on used ones, unless they are checked over.
also the difference between 65 series and the 88s, thx PS sorry for jacking ur post.
I just spoke to a racer yesterday about the same problem, he changed the convertor and had the same problem. he found out the new convertor was...
hi would aluminum rods go stale so to say if you had them kicking around for a few years. also is there a special way they have to be stored and...
u will need the adapter.
maybe the you need to buy the green brad penn oil instead. not sure just was forward this email, if anything good to know some thing about oils.
here is an article on oil. Pontiac Junk Collector Join Date: Mar 2003 Posts: 2,931 Trader Rating: (13) Brad Penn Oil - FAILED!...
I am sure it can be done. just get a good machinist to do it.
