Separate names with a comma.
basically, at high revs the motor (and blower) cannot ingest enough air for the amount of fuel being thrown in because of the high RPMs so the...
thats perfect thanks :) will be going for a billet hold down clamp instead, ought to stop it walking under load
basically we are looking to run this [img] which has an ID of 3 1/2 inches, on our mag I was assuming it would clamp round the drive just above...
useful site for looking at different bore and stroke combos for a big block http://www.roadsters.com/bbc/#bore
what diameter is the drive for a Sprintmag? the bit above the manifold where you clamp it? Just want to make sure the new clamp we're going to...
we just put some Lucas Oil Stabiliser on them, never had a problem. That stuff is thick as it comes and won't be shifting
I heard they'd gone, but DJ Safety can do any work on Chute Metal products that needs to be done
for me in Europe it has to be: Eero Kilpalinen running 5.69 in TAD when the record was around 5.75 first in the 5.6s in 1999 which stood for...
I've heard from a pro mod team, it'll rev to 10,500rpm with no problems, set the limiter to 10,000 it hits it and destroys the valves/springs
simply because the distance from the end of the blower snout/front cover to the load (ie; blower belt) is longer which increases the bending...
by no means an experts view but; I would say if you mount the cupped end out it increases the bending moment on the snout/snout to pulley mount...
another question, I apologise but all the clutch stuff is new to me who actually makes SFI 1.4 flywheels? I can only seem to find SFI 1.1, and...
http://www.nitromater.com/tech-questions/1042-simpson-helmet-air-system.html useful thread on nitromater started by Rapid, some very good...
cheers guys, one of those things that popped up in my head and made me wonder
probably a stupid question but there isn't a difference between the bellhousing pattern on a 481x Rodeck Chevy block than a standard big block is...
thanks a bundle wannabe :D much appreciated
I'd be interested to know too...
thanks for the replies guys, as always top notch info so we know what we're looking at now the motor is a 517ci big block with alky injection,...
Just wondering what specific equipment we need for this setup as I understand it, clutch with a starter pocket cutout, standard chevy starter...
had a look before but cant find an email address
