Separate names with a comma.
System one One thing I like about system 1 over oberg is the "catch cup" at the bottom of the system one housing (if mounted vertical). Bits and...
Starter Look at Troy Ferry's boat (#247 your next TAH), he uses a starter on the motor plate. Seems to work well. I do not know what the part...
lifter bore Another possibility to add to your thought, I had the same problem once after a cam regrind. The base circle was reduced causing the...
I know what you're saying, that the one front port on the K BV is in literature designated as the "pump saver" port. And fuel is directed there...
B&M Blower I helped a guy out with one on a Bonneville car. Back then, Mike Kuhl did a nice freshen up on it. They are built loose for long life,...
I've followed several threads on here about having (approx) 17 quarts of oil capacity in the engine to run the 1/4 mile. My question is, do you...
Manifold Your better off finding the correct deck manifold. I guess people can make anything work..... it is not like BBC where you can just add...
Lenco oil I don't think I could have wrote it any clearer - I have used both individually - not mixed. But go ahead and blast away on you...
Lenco oil Here's my 2 cents worth...... My thought is that a lenco (or Owens) needs an oil lubricant for the bearings, and a frictional...
Answer with a question How about using a MSD #8168 retard box? You could put changable retard chips, and bring it in or out as you desire. It's...
Turning engine I had a rolled sprag in a Lenco dual sprag trans (1 of the 2) cause some interesting engine turning symptoms once.
Timing Chevy's will take more timing than a Hemi will. The more conservative timing numbers you've seen on here are probably for that reason...
Rodeck bearings I ran an 11.5:1 562" Rodeck 60% on the helix. A methood I used to monitor bearings was start up oil pressure (cold) when that...
I've been looking for contact and/or tech info for PSI valve springs, and also for System one filters. Any direction would be greatly appreciated....
head torque I have gotten different answers for this question. BAE says: 9/16"=145lbs, 1/2"=120-125lbs KB says: 9/16"=120lbs, 1/2"=85-95lbs My...
Bob Otto The number JR gave you for Bob Otto is Automan
Port nozzles Doesn't look like anyone wants to touch this one for ya. I went to ports a while back and heard the same chatter from people. I...
Black hose Great question! I've been starting to research that myself. All I know about is Earls 350 that is more expensive than ss braided. Any...
Velasco Velasco's shop info: 12422 Benedict Ave. Downey, CA 90242 (562) 862-3110 Awesome guy, one hell of a drag racing history picture...
Crank repair "uncle" Henry Velasco did an excellent weld up repair for me awhile back. Definitely a job that was worth recommending his services.
