Separate names with a comma.
I am new to the bruno's, And I want to find out what type of ATF are you guys using and why? thanks again for all of the help Butch
I have a tec question for the racers that run the Goodyear 36,17,16 slicks with beadlocks on a blown alky applacation. 1-Are these tires more...
Brandon yes, I have a throttle control unit and the 2 step, so when i am at stage rpm the throttle is open about .120 and my low gear lean out...
All, my old combo was a R.E.D with a blown alky BBC psi 206D blower, power glide/ 1.80 first gear, rear gear is a 4.30. 34.5,17,16 slicks at 5.25...
BBc blocks Promod63, New Centrey makes a great block, I have had several of them and never had a problem, we are making about 2600...
All, thanks so much for the info, saved me almost 2 bucks a gallon from my local guy. Butch
All, I have been looking for a good suppier of methanol at a good price up by sonoma, what is the going price people are paying? anyone you can...
SPEC RITE all the way!!
fuel set up on a PSI screw blower Tom, The fuel set up is completey differant then what you had for a 14-71, I have been running a 206D on a BBC...
Low gear lean out All, thanks for all of the great feed back, I think I have a real good place to start, I will start off on the safe side and...
All, thanks for all of the great feedback!!!, The valve I have is a n/o valve that closes when co2 is applied, I have the fuel system pretty close...
Mike Canter is the man!!!! I will keep a eye on the drive line rpm .5 into the run to make sure it is above 2600 rpm. What would be a good...
Hi all, I want to install a low gear out on my fuel system, I have a valve that will flow the same as a .085 main jet, I have it hooked up to CO2...
MSD Mag ? What mag are you using? If you have a MSD mag, us a 6 shooter and a leahy timmer to pull power out at the hit or shortly after and then...
Hoosiers Thank you all for the help, I am now a real hoosier fan, We were at Sacramento last weekend and as all the rest of the races were...
I am running a CS-2 lenco, shifting it with 250 psi co2 and I need to find a pressure switch for CO2 that will close as soon as you apply...
Never run it with out the dowel !!! when you us the 1/2 inch TF bolts, yes you still us the dowel, and you have to adjust the shoulder depth of...
Flywheel bolts coming loss Wilman, I had the same issue for some time on our set up, I was able to make a tool that I can check the flywheel...
Dripplers I have tried to run my set up both ways, and using the dipplers is the only way I was able to control the heat at idle, stage, and at...
Brandon, Dave. Thanks a ton for the info!!!! We are going with the Hoosiers Butch
