Separate names with a comma.
Tom Thanks
Water grains and et Will, All Our dragster also has a screw blower and we are also using a air controlled throttle to stage the car, I have...
All, last weekend we were running in sonoma CA, we are running a top dragster E.T. was 5.96 to 6.02, the air was pretty good the best...
Call Marty at Chance racing converters, he can set you up on the trans fluid and if you are having heat issues with your Bruno call Grant at FFI,...
BBC set up Thank you all so much for the help!!! It is a iron 10.200 mark 4 chevy block, going to run 7.0 pro with it so dont need a ton of...
piston to head clearance Is there any issues if you close it up to .035 to .040?
Thanks Sir
What would be a safe minimum clearance between the piston and the head on a blown alky set up, grp alum rods, JE flat top pistons, copper head...
I have a 10.200 tall block BBC, I am running a 206D at 93 over and what to start pushing it more, what is the largest 8 mm lower pulley you can...
what do your plugs look like after a pass?
wheel speed for goodyear 34.5 tires what is a safe wheel speed at .25- .50- .75 - 1.0- thanks again Butch
Converter help Call Marty at Chance Converters, he can help, he will look at the racepac and let you know whats going on, 316 542 9869 Good...
Crank support I have a brand new BBC RCD crank support complete, never installed. 707 974 3185 Butch
blower belts Marty, If its not to late? I will take 2 of the new belts, call me at 707 974 3185 or email spmi@sonic.net . thanks...
BBC heads J.C. We have had Very good luck running used Dart 360 heads on our 496 BBC, we run our dragster at 6.00 at 232 MPH and it works out...
Crank bolts backing off We had this issue until we went to 1/2 inch crank bolts, red locktite, and torqued then to 140LBS. also on some...
rear end ratio change TC1216, Thanks so much for the info!!!! This really sounds like a good option to me to get the engine rpm back down...
Can anyone tell me how much RPM's I will drop if I go from a 4.29 rear gear to a 4.11? we are 232mph at 9050 RPMs at the quarter mile, 17 by 34.50...
Lat oils Clif, try 888 528 6457 or you can goggle (LAT oils) they are in the L.A. area, you want the pro ATF, its about 75.00 a gallon and we...
55MM cam We have been running the New Centrey blocks for over 10 years, I have had a total of 3 blocks and as of today we have never had a issue...
