Separate names with a comma.
Hi, I've got a Crowerglide for my car, Now i've never driven one of these, is it right that you press the pedal just to move the car around ? how...
Hi Chuck, Thanks for the info , I'll check everything and measure everything twice , I've been building cars for nearly 27 years but this is my...
Hi Chuck , I guessing the stands are Dick Landy like the rockers, they are anodised blue , since i posted this i've been playing around with...
Hi, speaking to lots of people their intake valves seem to be 5.6" long, I've set my valves up for optimum positioning of the rocker (and set with...
5/8ths !! Hey only asking :D
Ok apart from the added weight and greater clearance needed , why don't rods have a press in stud and nut that can't pull out ?
Right the Dart/Total flow heads are 1986 and the ports are about 16 1/4" from one end to the other, The other heads are 1996 and the port length...
The rear head in the pic (5 bolts) is one of the Dart heads prepped by Total Flow, It's the nearer head i'm trying to identify, I've tried my KB...
Right lets see if this works The Dart/total flow heads are early Dart twin plug forged fuel heads prepped by Total Flow, the others are in the...
They didn't upload, got to resize them, back soon
Well i paid up last night so i could post pics and took some today:D
Hi, I've got two pairs of heads, one set say Total Flow, got in touch with them and they said they were Dart ? The other pair look similar to the...
Hi, Probably been asked a lot but who is doing the best inlet and exhaust valves for a blown alky hemi ? is it Victory 1 ? Thanks for any...
How about the Snap On digital torque wrench ? , mine's pretty new but do they go out of calibration as quickly as a mechanical one ? Oh Will my...
I used to have a similar problem if the gearbox wasn't warmed up enough for the first run of the day, after the first run it worked ok
I thought that was probably the case but wanted to make sure in case i'd missed something, Thanks for replying !:D
Cheap Fun I was in a similar position years ago and i built a VW bug with a stock 460 ford,(in the front)The engine cost me £450, i put a tunnel...
Hi, just putting together my new KB for the first time, i fitted the two rear main seals and the two side seals but in the bag there were 2 of...
I have an Impact helmet, are they OK ?
Don't fancy smuggling any other bits do you Will ha ha :D
