Separate names with a comma.
i ran screws in my 3000 lb door car with a screw blown big chevy ran 4.40's-4.50's in the 1/8th and never had any issues having said that, now...
If it were me, purchasing a car unseen like what you are looking for, i would go through mcamis or bickel. Call them and tell them what you need....
Brad Personett might disagree with you on that
installed height on exhaust is 2.0 int is 2.1 thats why its stiffer, but that's what i'm trying to find out been playin phone tag with veney...
I've got a set of 2.5 veney heads. What is the normal spring height on these things? I'm at 2.1 int and 2.0 on exhaust. I'm looking at different...
I had a similar problem, the spark is incredibly weak for some reason with the 7531 w/ leahy pickup. i couldn't see it. Turned all the lights off...
Noel, could you call me about the springs i purchased this week? having a small issue thanks! 214-724-1056
3 speed gives one more chance to strike the tires, so consistency could be affected by that. JT, curious as to what trans and rear gearing you ran...
http://www.youtube.com/watch?v=G1SAK2irVII&feature=youtube_gdata majority of ADRL cars are using these units
http://www.moretraction.com/dragracing.htm
Got it at lowe's or home depot i think
Why not just buy one? I've run them both in different applications and they worked very well for me.
Depends on rpm you want, if you're gonna run both you might be better off with the 3 speed, but definitely less 1st gear, i'd go to about a 4.30...
Wow, just watched that second video and you'd probably be better off racing on a dirt road. is that really a track or did they just cone off a street?
x2 you're gonna need a whole lot more rear gear. bump those rears to 4.86 to 5.13 make that trans a 2 speed 1.44 first and let er eat (you are...
Use timing to control your power at launch. Either a 6 shooter, msd 7531, or the promag controller to pull timing at the hit and ramp it in....
vacuum I have run a star vacuum pump on a 557" chevy with a whipple at 43 lbs of boost and using a check valve (2" diameter from home depot) was...
Only One answer, Meizere. Super qulaity piece. I run one in my 3100 lb screw hemi car.Spin it 9200. I've slung the starter ring off a CSR and JW....
Boost pressure is the air that isn't going into the motor, so better flowing heads would read less on the boost guage because more air going into...
Can't hear mine, but it works fine Hey I'm a poet and didn't know it:)
