Separate names with a comma.
buy a meziere billet flexplate. no adapters, it's all one piece and is extremely stout. Make sure and use some antisieze on the converter.
anyone know the weight diff between a kb stage 10 cast block and a brad billet block?
Like Ray Akerly says; "People need to start looking at the second ring as 'the secondary oil control' ring, NOT a 'secondary compression' ring."...
Troy Critchley's deal, Not sure what you want to know?
website Yeah their website pretty much sucks, that's why i told him to contact Noel :)
I've used the torco stuff with good results as well. Noel Manton can sell you the techline stuff, he's a sponsor on here.
I have Veney heads w/ pressurized intake rockers and nothing on the exhaust. The only thing we do is on initial fireup (first of the day) is use...
Casio Exilim EX-F1 Cost $1000 new Works great, but only during the day. It need a good amount of light. heres a vid of my car at 300 frames per...
I ran a T400shaft on my car last year for about 4 races, (4.40's @ 3100 lbs) plus in my previous car with a screw at 3000 on 10.5's. the shaft had...
The only blocks I would use are new century, kb olds, or dart iron block. BTDT
What block are you running?
You wouldn't have that problem w/ kb olds or new century both have cross bolted mains
BEST? CN Billet Best bang for buck? KB olds block or new century
2 step w/ auto I use a 2 step with my lencodrive in conjunction with an air throttle. Open throttle about 1/4 way and 3700 chip w/ no bleed off....
I use the gopro, it works very well and very affordable, no interference from my mag 44, can't say about the mallory though...
Talk to Joe Pando at MSD
OK JP, I'm a dumb ass, looks like I must have tweaked the ring (s, 2 actually:) ) installing it without a ring expander, checked it on glass and...
I've got one race left this season and am replacing a piston. My motor has moly rings in it, but the only thing i have is a stainless ring to put...
casio exilim pro ex-f1 about $1k but shoots killer high speed video up to 1200 fps here's a video at 300 fps...
For our lencodrive, we use a $40 12 volt ebay oil pump , 2 quick disconnects, and a finned trans cooler in an ice chest, pull fluid out of the pan...
