Separate names with a comma.
Sorry Don, Havent been on in awhile. Ive been in Reno. Had to get out of Dallas and that 100+ degree heat for awhile. I havent checked to see...
STD main. Crank is a Bryant. Not sure on the bearing clearance.
It's a Dan Olsen pan with Windage tray, crank scraper and duel trap doors. I'm thinking a deeper pan or a accumulator will fix problem.
I have a KB Veney Hemi with a wet sump Dan Olsen oil pan, System 1 pump, System 1 filter. At idle (2000rpm) when warm its got around 30lbs which...
slap happy Lots of slapping going on here....Guess I need to get in on it too!!! Radiator hose for me as well!!!!
Hone Did not hone cylinders.
gear oil I run 75-90 in my blower. The thought of lightweight 2 cycle oil that wasnt designed to lubricate gears makes me uneasy. I have a friend...
Is a Carbon GT2 belt any stronger than a GT2 Urathane?
Rings We did have Total Seal rings in it and we replaced them with A&C rings. NO MORE SMOKE AND RUNS LIKE A CHAMP! :cool: Thanks for the...
No compression Lost all compression in #1 cylinder Tonight. Still smokes without top lube. Gonna tear It down next week. Bleh!!!!
Ol Smokey Rings were new Total Seal. If the rings were in upside down would it have blowby? Mike, You have a good point about the fuel additive....
It's never been hot. 1050 tops. It's has smoked with two different sets of heads.
I have a Veney KB Hemi that has a bad smokin problem. It moves a lot of oil through the exhaust but no blowby. Leak down is fine and no oil in...
Leaky Hemis Had the same problem with my KB. Used alot of "Right Stuff" silicone and it quit leaking. The diaper catches the little drips so its...
Leak Replaced rear main. Cured leak. Very weird. Seal looked good.
What would cause oil to shoot out of the back of a fresh KB Hemi when it is put in gear? I recently put a spare 526 KB Veney in last weekend to...
This is a new motor combo. Ran a MSD 10+ on a BBC with the same blower, hat, tranny, converter last year. No Issues. Engine sounds great at fire...
Update Tested last night after taking the 8973 out and putting a two step in its place. Same problem.....The 8973 was good after all. Motor...
8973 The box was not working per MSD. There was no "flashing red light" when we fired the motor. Sent box back to MSD yesterday. Both...
8973 Ripped the 8973 out and put a basic two step in its place. Sounds like a totally different beast. Will update after tonight.
