Separate names with a comma.
Not too bad 9400. Not too bad
Broke tranny last weekend. Tried to start engine just to make sure it was ok. Engine kicks back like timing is too high. Timing is at 25 degrees....
Block mounted starter We used a MEAN GREEN starter for a very long time on our Hemi. http://www.mean-green.com/ HOWEVER, I need to add that...
Powerglide Ive run a glide for years. Make about 2000+ in a 2700lb door car. JW case, billet everything, Coan input shaft (turbo), and a billet...
Sweet Thanks Thanks, Ill give them a shout
Anyone ever used Lucas 70 Plus? Been using Brad Penn but having a hard time finding it locally.
Tranny Fluid Ive been using Coastal 303 Tractor Fluid you can get from AutoZone for around $35 for 5 gallons. Never had a problem. Running 4.20s...
Launch I launch my ol turd around 3800. I do not pull any timing out and 60ft's are 1.00 to 1.03 in a 2700lb door car.1.80 Straight Cut...
Thanks Thanks for the input guys. Randy
Nitrogen Has anyone ever used nitrogen rather than compressed air on slicks? Seems to maintain pressure on street tires.
Oil leaking Hemi I used to think my BBC leaked oil til I bought a hemi. I think the only time mine doesnt leak is when its at the machine...
Thinking about lowering compression ratio for #1 and #2 cylinders by 1 point on a roots blown Veney deal. Anyone ever tried this with success?
I'm sure I'm gonna get 50 different answers but here goes. I've been running a 4.500 stroke crank in a std deck KB Stage 5 block with a 7.11...
I had a set of Veney/SSI heads the have the old Red Newberry style rocker stands. Never had an issue oiling on these heads. I recently bought a...
Mean Green Hit my Mean Green starter with 36 all the time. No issues
Spring Pressure Alot depends on your cam. If your running the old 296/500 then I would say between 380 to 400lbs on the seat @ 2.05 to 2.100.
Self Racing Kevin Self out of Durant Oklahoma is a good guy to deal with.
Junk Lifters ATTN!! Everyone please send all of your "questionable" lifters to Randy Rencher 2080 McDaniel Drive Suite #150 Carrollton...
Blower cars with a 2 speed glide can weigh 2550. Should be a pretty close match with the limits on OD and weight. Hope to see you guys at some...
Cranks Personally I think alot depends on your application and how much HP your running. I ran a BBC with a CAST 4.25 crank to about 1700hp at...
