Separate names with a comma.
I would suggest that you get a hold of the company direct to insure you get proper gaskets for your combo. some heads require different...
I have a small block cast iron block. the problem i encountered was the water was coming up the studs. i tried different thread sealants with no...
compression seems to be a little on the high side .two questions did you retorque the heads after you put them on and fired the moter and it...
I have been reading various threads regarding main jet sizing. Some suggestions will tell a person to change from a size 60 to a 120 this seems...
problem solved problem solved . i had to prime pump from the top . did it twice it took a while for pump to suck from tank, around 30 seconds...
Also removed pump from extension and turned motor. shaft is correct and is turning with the motor.
The notch on the fuel pump is in the 3:00 position. when i used compressed air to feed the bottom line we had fuel to the bottom inlet side of...
dave who makes a flapper valve that i can put inline to prevent fuel from flowing back to the tank.the fuel line is a 12an. i tried using air...
fuel pump is a enderle 80a pump. The pump was turned 180 degrees and mark on pump cover was in correct location as per instructions from enderle....
i have changed my fuel pump from belt driven to cam driven. fuel pump was taking apart to change drive direction and put back together , fuel tank...
What methods can be used to flush alcohol out of your fuel system. You can drain fuel cell but what about fuel pump and injector pieces. should...
Looking for info on powerglide transmissions. Cannot get transmission to go in to park proper. I can get first gear to work proper or park put not...
