Separate names with a comma.
i run a M/T 34.5 with a 4.10 gear, 7277 motor rpm and 7170 driveshaft rpm, with a converter at 195-197 mph. The converter is a Hughes 6 leg...
jim, if those loops fill with fuel, have you not lost your "vent" since the line has fuel in it?
i have a 2" set back plate and I am also about 12 numbers different front to back with the rears still colder. I have a very small nozzel (30) in...
i have one in my fuel system. I am going to the larger screen type. if you get some trash in that, it can really hurt fuel flow fast. go mine...
I currently run a 540 BBC, conventional heads and 12.4:1 compression, 8-71 HELIX Kobelco i have NGK 5671A-9 plugs (pretty sure of the number)....
Branndon, how much was your suit? 2 piece or 1 piece? My brother had a -5 suit made for him by RJS for only about $80 more than the standard...
i understand your frustration, but I would take them out of the motor and take them up on their "offer to make it right". If your rod fails now,...
i have been told that the 60%/40% split on the roots is a good baseline. I have port nozzels down to 30's in my manifold. I needed to do this to...
tried that same tire on our 4-link dragster last night with 6.25 lbs of air with no issues. I think it would be better at 6.5-6.75
where will you mount the temperature sending unit. I also have a non-water block and motor and wanted to run a cylinder temp gauge on the data...
pump pressure my pump pressure is low at only 85 through the lights and 55 at the shift. i do run a 150 main jet and a 55 high speed to get the...
my 16v V-Battery shows 17.35 volts on the alternator. I don't think voltage will be a problem. Just looked at the plugs from my buddy running a...
i am looking at running in the 20-30 lb boost range with 12.4:1 static compression. Is the 10-plus worth the investment
we were not able to do ABA testing, but it seems that the zoomies are about the same as the good headers. The one thing is that the zoomies did...
at what point with blown alky do you need to go to a mag. How far can you go with a MSD 7AL-3
Jeff at JDF fixed me up today. Thanks for the replies, and a MAJOR thanks to Jeff for getting me going so quick.:D
The blower is a Kobelco 8-71 Superman with a 5" snout. How do you know what is full? do you fill it by removing the pressure relief valve and...
have any of you made the change from headers to zoomies? what changes did you see in performance and tuning. 540 BB chevy, Brodix conventional...
which seals are you talking about?
i have a Kobelco blower that started leaking oil out from the top pulley. I am going to pull it off and check. Any ideas as to what is leaking,...
