Separate names with a comma.
I thought that you took out fuel or timing while on the two step as the engine isn't loaded and therefore can't use the extra fuel.
Havn't had the reverser problem with a clutched Lenco but many months back it was discussed and most said "don't blip the throtle to try and get...
Mine is the same with a BAU hat I'm just going to put the plate in the folder and put a little angle down on the tab. We don't need a...
Mike, Agreed either end but not both. Earthed = Aussie Sparky talk Tyson.
and only earth one end of the shield. If you earth both you can get Earth loops and cause more problems.
Fluid flow is a stange thing. What is an acceptable PSI drop? As input pressure goes up flow will increase but not propotionally. eventually...
neither do we so we are getting the MSD bulk wire. On a different matter (the Summer Bros drive) did you have to extend your blower belt...
We have the similar but use a 44 and the long (under the header) leads look as though they might just fit if they are used over the top and run...
It's not what you want to hear but can you move the blower by changing the brackets? then you might be a ble to get a belt short notice if you...
I didn't think a CS2 bolted up to the Bruno? But have no real idea on that as I have a clutched CS1. Coarse spline is the old style but when I...
CS1 has 1 inch wide gear CS2 has 3/4 inch gear CS1 is center shift CS2 is offset Is it a lenco drive/ bruno or clutched? Does yous have...
I have the Summer Bros drive and a mallory drive with the dunn coupler to the 44 the Summers housing didn't come with a oil feed line / hole...
do a search it was discussed in the last 6months
I've mounted mine to the front of the motor plate right next to the top of the Mag. I'm useing a 44 witht he summerbros drive and didn't want the...
So LF don't even know or understand what they have on their own web page???
I think you also need to say (with sheet metal valve covers)
Only earth one end of a shield or you will introduce an Earth Loops and more RF problems
10 inch crower curretn rear gear is 5.0 so that will need changing 32 inch tyre 3000lb only looking for 7.50ish over the 1/4 just trying to...
Thanks all who have helped me get to here. (see old posts) I have started to change the Lenco from a 4 speed back to a 3 speed. 1.5616 ratio...
"Downunder" top speed secret led light yep (couldn't help myself) Wrong - was speaking to Maurice on Monday Correct - a Anderson car...
