Separate names with a comma.
I know to use a dial bore gauge but I don't have one or a mic big enough to go around the piston so I was just trying to get some idea of what...
Yes, the pistons are scuffed above the ring lands. I measured the clearance last night at the skirt and I could barely fit a .008 feeler gauge...
Thanks for the replies. The wierd thing is that it is scuffed past the ring land area on the cyl walls almost to the very top of the cyl. I will...
I just tore my motor down and found the pistons had scuffed the cyl walls pretty bad and I am taking it to the machine shop to have it honed if...
I've run Crower billet steel rods for 4 years 1500+ hp with absolutely no concerns. Still run the same rods today. I also run Clevite 77 H...
If you use green slime, I guarantee you will have a tire vibration out of this world! I work at a dealership and sometimes customers complain of...
I have everything in the car, I had to make up a new midplate because mine cracked. I also had a flywheel come apart and take out a piece of the...
Who makes a tool to make sure my motor is sitting inline with the rear end. I would prefer some kind of lazer. Motor is BBC, funny car chassis....
What thickness are most of you guys running for your wrist pin? I was running .200 and was told for more boost and rpm to get .250. What do you...
I'm getting ready to cycle out my lifters and came across the new Isky roller lifters that use bushings and do not use needle bearings. Should I...
I have everything o-ringed.
While I tear my motor down and go through it, I was wondering what your guys opinon of gapless rings on the 2nd groove is. Is it a waste of time...
Does anyone know of a company making a 360 degree belhousing for a Reid Powerglide case, similar to a clutch can. My motor backfired and ripped...
I have one of his cams. One of these days I will check it and see what all the specs are, but I just put it in and timed it where he wanted and...
I don't think you want a solid "flexplate". Automatics use a flexplate for a reason, to flex. If you put a solid plate in you will have more...
I have had absolutely no problems out of my Coan "Ultimate Big Dog" glide. I also run there 10.5" converter. Never had 1 concern with it, been...
I run the Red Alert program on my Blown BBC with 8 egts and have had very good luck with it. However, I am upgrading over the winter to the RPM...
I run a brand name 80-90 synthetic in mine and fill it to where it just covers the middle part of the spool.
With that timing it looks like it should be low maint on bearings.
If you are trying new combos on the engine, then I do it after a day of testing, unless I am getting aggressive with timing then after 1 run. If...
