Separate names with a comma.
Coan! I bought the 10.5 bolt together and they said they set it at 7,500 stall. Blown BBC altered. It is pricey but worth it.
I run a blown BBC and use a Jeff Johnston billet 2 piece pan, Titan oil pump and 14 qts of 50 wt VR1 oil. I run no restrictors and have never had...
Meziere billet flexplate. There are others as well but don't buy them.
delta A delta is a triangle shape. It's just a more technical way of saying pie shape.
Thanks for the good info guys. Looks like I will not bother having my Reactor repaired.
Anybody use a CSR aluminum flexplate for blown alchy applications? I have a Reactor flexplate now and had like 8 starts on the engine and it...
Thanks, thats exactly what I needed!
Where is the best place to get a deal on the connectors you use to hook the battery to the aircraft starter?
Found my problem. I had a ground in a connector that had partially pulled out.
Last week I had my super mag III upgraded to a IV and now my tach reads higher than it should. At idle it is off 1000 rpm and goes off even more...
I just bought the Hybrid rage from www.safetysolutionsracing.com. I have a very tight fitting cage and I have tried other systems but had to...
Marine Crankshaft = excellent work.
You will probably have to run a T body. They have a longer back section and you can put more items under the turtle deck. I wanted to switch to a...
Are you running a converter or clutch? I had a similar problem and the converter was junk. But my compression was never that low. My two cents.
Thats Oddy's for ya. No labels or part numbers. So if you get the wrong parts, you don't know till you have spent several hundred dollars trying...
I run 5.5 in my beadlocks. I had tire shake issues too but I run a glide. Dropped tire pressure to 5.5, leave around 5000 and set wheelie bars 2...
I run a altered with a blown bbc (all aftermarket parts) and a 14-71. My start up on car alone was around $40,000-$50,000 (just parts)...
Ran a Crower crank for last 4 years in blown bbc no problems. I did however, have to wait almost 2 months to get it. It was supposed to be less...
I had a very similar problem on my blown BBC and it turned out my Enderle pump was bad. I put a new one on and egts at idle came down. My old...
Put the valve either off the T on top the fuel pump or in the line that runs between the pump and k valve. If you run a normally closed valve it...
