Separate names with a comma.
Wanted...RCD 5.5" or 6" crank support stands and bearing support. thanks Steve 585 260-3568
Hi Boostedgt500.......we are in the process of relocating in LHC. Bought a house but still have our Rochester NY property. I knew Gorr was in...
Your best bet is to get the pump flowed and get a tune up from a reliable source. My suggestion is Spud Miller @ FIE (fuel injection enterprises)...
pump flowed? GPM? engine cu.in.? using ports now? do you know what your pump pressure was at your max RPM? What was your max RPM?
What is the relationship between the top hole size and RPM? I thought the shoe was to keep the rotors in compresion longer?
OK guys...tip from Frank Hawley's school a long time ago ! Hand warmers in a small cloth pack...velcroed to the shield untill you start the car. A...
FOUND the PROBLEM.........RCD sent out some of these drives with the wrong end cap. We took the drive apart and set the mag in and the bronze gear...
I have a RCD front mag drive. It is for the full length mag. MSD20. My question is ....How much should I be able to turn the rotor by hand?...
Piston to head "quench" is very important in BBC. Alum. rod engine. Should be approx. .062. Too much and you will have head or piston torching...
Eastwood 200 ac/dc MUCH better than I expected.
Rpm ......................
I use a air throttle controller to set launch RPM. I run the 7.0 pro class and the rules for the HHR and March meet do not allow air throttle...
Latest ND has Todd Veney talking about a "notched" throttle linkage to set staging RPM. Can someone explain that? pictures? Thanks, Steve
I've used a "crock pot" and a Temp gauge immersed in the oil. I get it about 170 and let it stay until no more bubbles. It is one of the old style...
We build to .062.......keeps the quench nice.
I'm putting the accumulator back on and adding hose from each valve cover. There is a 12an fitting in the pan that is capped off right now. I made...
Thanks for the replys......it helps to have people with experience give their advice. I was adding oil after each pass and have at least 14/15...
I have 477 cu.in. Arias BBC. Supercharged and running 7.0. Oil pressure is 80+ at startup and all through warmup in the pits. Start at the line...
12 volt LEDs. I have 3. They come in a variety of watts....run very cool....nice white light.....and you have to have the generator running to...
Try another crank trigger !
