Separate names with a comma.
Oiling valve covers BigB -- Call Art @ 620-662-4332, he can engrave & paint them as well. Good guy to work with.
You can buy fab'ed valve covers with oilers inside the cover. Some of the KB blocks have a pipe port at the rear cam bearing you can use to...
Toad The toad will prevent frame damage. Just remember the overhang does something else, it puts the tail of the vehicle and the front of the...
A crew cab & goose neck w/living quarters would be better than a "C" w/v10. The "C" w/v10 has trouble pulling a 20' w/jr. dragster. Spend some...
Rev Limiter I agree with Dave, Autometer works. I use one with a Mallory Supermag IV, 4.5 amps. I didn't think I needed one until it was two...
Maybe they will accept billet flex-plates, who knows, NHRA has gone back & forth on blowers in TD. Tech seems to look the other way from time to...
TAD vs. TD Jody, - You have a big challenge per the current rules. TAD - " No starter ring on flexplate" TD - "All entries must be self...
Record this one Don't forget to record this one, it may be the one and only time one of his cars stages. Think it will break the beam ?! :-)
Clearance info For those who want to know -- Blown Alcohol Hemi - 4.250 bore - Arias Pistons - .007 - .008 @ 1.100 below oil ring.
Will do -- Thanks!
Blown KB - what is the recommended clearance and how far can you go prior to bore job and new pistons? Have not checked what it is, just taking...
Have a "K" valve and looking to make sure the pressure is high enough for the fuel to be atomized.
Where is the best place to pick up fuel pressure & what is a good pressure to shoot for? Don't have flow meter, have roughly a 55 - 45 split...
Google " Don Jackson Engineering" the web site will explain. ( another type of high speed by pass!)
Excellent info, Mike - thanks for taking the time to help!
Mike, Can you get the retard info from mallory tech or is that from experience. That is good info, but like others would like to get a better...
Take the one you have to your local hydraulic repair shop, they should be able to match it.
I'm using a Mallory Super Mag 5 amp, alcohol only, 32 degrees, don't have the cc info at the house and 10 -1.
A few weeks ago some posts talked about timing on different combo's. Someone indicated that when using fuel heads on blown alcohol you need more...
GPE starters work great and will handle 24 volts. Greg is great to work with, I told him what combo I was running and what I want to do and have...
