Separate names with a comma.
We run 2/0 cable on our 48v system but it is overkill. Shannon
Wanted: 8-10 Hemi Pushrods. Need to be 11.930-11.950 in length (top of cup to end of pushrod). Some manufactures list length from inside cup to...
+1 to the above. You will charge from those same two terminals as well. Also, if these batteries are on board the car, you can use one of those...
I don't believe it will float, but never tried. Since it's automatic and voltage sensing, once it hits full charge I believe it will shut off....
We've had both. I wouldn't recommend either. They are made well, but you are completely relying on the tires of the toad. We had a tire come apart...
We use a Stanley variable charger. It does the 48v and the 12v batteries both....
If you have the room, I would go the 48v route.
Yes sir, those are the batteries we use. There are smaller batteries out there, but these do the job well.
You can use either 48 or 36 volt per RCD. We use the Odyssey PC680 batteries for ours. They are small and work great. They can be bought through...
Thanks. The goal is to have a high gear lean out using the pump loop pill. Start with an 80 and once I shift, it would close the 80 and open an 89...
I run an Enderle pump with a pump loop similar as shown below: [IMG] I want to take the pill out of the pill holder.Then remove the hard...
I have (2) Plueger - P & P dry sump pumps for sale. Both checked by RCD. Pumps come with bolts and AN fittings. Ship from KC. $650 ea plus...
We swapped over to a crank with splined snout. Does someone make a socket to slip over the splines for a cam degree wheel (not the timing wheel...
Found one. Thanks ITA. Shannon
Looking for a good standard 4.150 hemi crank. Standard snout (not splined). Let me know what you have. Thanks, Shannon Beal...
For us the relay just quit. It was between rounds and we caught it in the warm-up. Moisture could be one issue we face (our application is a...
We used the button in our TAFC with great results. We just don't have room for it now. The MSD relay is this unit: CLICK HERE One thing...
We mount the solenoid near the coil/box. We've gone through (3) of them over the last year (Promod BAE dragboat application). We even had issues...
Sounds like Sean will be very busy! Good luck to you guys this year! Shannon Beal Beal Motorsports .
Pizza set the previous top alcohol hydro record with BAE 6's with a 4.4X @ 1,000' (C case screw blower). And the current 4.32 record is with 8's....
