Separate names with a comma.
Ok... When you say "hot wire" the starter solenoid do you mean straight from the 24V main battery lead to the starter solenoid? If yes I am...
AJ481X I am running 24v straight to starter and 12v on the solenoid as well. Seems to work fine. Can you explain why you feel that an extra...
Jeff usually asks what starter you will be using to make room for it when he fabs the pan. I have a Powermaster XS tourque that fits fine... There...
Thanks for all the clues guys... This is quite a new combo, only about 6 laps and I did get on the wrong side of the tune up a bit at the previous...
Thanks Relentless... I actually centered the bearing as you described, I actually lost the four main bolts that hold the sucker on. Maybe the...
Howdy... I am having a problem with an RCD crank support on a BBC. I have lost just about every bolt in it now. The crank hub (RCD) has a small...
What is a double swap cam? Cheers Pete
I have a Billet Fabrication 2 piece pan, it it a very nice pan. Can't comment on how well it works yet as we have only just started testing but...
Just had a look at the Flatout Gaskets that advertise on this site the silicone coated steel ones would be the ticket Cheers Pete
Howdy.... I used to runs some hand made teflon sheet inlet gaskets on my old NA engine. Has anyone tried this material with a blown engine. It...
That's some quick times, what cam? Cheers Pete
Thanks BBC... I am prepared to pull timing at the hit, was thinking 28 max so I am in the ballpark so it looks like about 15 off the start line......
This is interesting... I am running a short collecter on my car so I did not have to chop it up for zoomies when I put the blown engine in it... I...
Thanks for the responses.... Here is a little more info.... T&D rockers with the long bolt in the exhaust, Big M block, Smith Bros pushrods, not...
Howdy.... Just starting out with a set of 14 degree Big Chief Solids... What would be most likely to cause rocker problems apart from geometry...
Thanks for the replies, dodged a bullet the car ran got off the line OK with 25 degrees and ran 3 100th off its PB. Cheers Pete
Does anyone know if there would be any problems with this trans launching in 2nd gear? There is a problem with a friends MSD system so he has put...
Hey Clarky... Mine was the same but only 2 magnets in the ring. I belive a 4 or 8 magnet job will see it react quicker Cheers Pete
Thanks for the info... Cheers Pete
That would be interesting. My block is a good few years old, combo was put together but never used. I got no paperwork with it Pete
