Separate names with a comma.
Koni Gorrila valved shocks from Jerry Bickle. They are specially valved for JB and he sets them up on the shock dyno for you after you fill out a...
What tire size??? Cheers
Ron has the idea.. Nine times out of ten a sharp hit on a steel bench or on the vise will sort it out. In my experience tools that become...
You fit the crank support with the bearing housing loosened off a little and then turn the engine over several times to centre the bearing on the...
Has Lowell at New Century been asked about this? Seems from the posts above that this is not limited to New Century blocks but it may be more a...
Yes pays to have all the factors lined up, I have been having a problem with heat in the convertor, we think due to idle being set too high. Won't...
Jody.... What power you making and what do you have your idle set at.... Cheers Pete
I have freinds who run them and others that don't... My trans guy says that the value is more in the extra fluid capacity but after having my...
Spud at Fuel Injection Enterprises sells the one I use, it has heaps of surface area on the wire gauze filter element so little to no restriction,...
I don't know the answer to that, maybe worth a call to Lowell as he seems to be developing the block further. After talking to him in the last...
As far as I know it is a Big M, I am not the first owner but I am the first to get this engine going. The cap are the standard steel caps.......
Thanks Guys... As I thought there would be plenty of opinions.... Good to hear that there are companies still offering great sevice out...
Howdy Guys.... Probably 100 opinions but whats the favorite brand Big Chief Ti valves you guys are using... Cheers Pete
Thanks to everyone for the input, I think I will be talking to Lowell soon.... Hey Marc, I will have a chat to you soon as well Thanks all Pete
Thanks Ron... I thought I remembered reading on a post that you run a New Century, I belive you have Big Chiefs as well? I also like what they...
Hello Mac... I have freinds who have Big M blocks making much more power that I do in classes that dictate an iron block so I know they will...
Howdy... I am in the market for a new block after cracking my Big M block from one end to the other through the crank and cam tunnel.... I want...
Anyone want to chime in on what would cause this? I have a new Cast Big M with only a handful of runs on it that has done the same thing. Split...
My old N/A engine used to start a lot easier when we primed with gas Cheers Pete
Might be better to make the cut out in the pan bigger. If your starter dies and you need to borrow one it could leave you without many options.......
