Separate names with a comma.
I had a two step and air throttle on my Hemi TD. According to the data logger it was VERY stable while on the step. I showed a high-to-low...
Absolutely. I took your advice and launched off the foot brake, dropped the tire pressure, and put some timing back in it. One of the guys...
Thanks Mike, got that under control. Spud set me up with a tuneup down to about 6000 density, which would cover me if I went to Salt Lake for a...
Just had a great weekend. Finally got the car to hook all the way through and it was awesome. This is a 245" dragster with a 511 Stage 10...
I found a website that calculates MPH at the 60 foot mark based on your 60' time. Just for fun I'm curious to see if it's accurate. Do any of...
Just reply to your own ad with the word 'bump' as the message. -Brian
Will, Thanks for the detailed response. The quote above concerns me a little bit now. I had mine setup for 34 base and took another 2 out...
Roll it backward or forward? I haven't heard of this. You just clearing the cylinders so it doesn't hydraulic or what? -Brian
I know, I know! But it's really only 2 things! My crew is me, my wife and a friend. My friend says the same as you. He thinks its close enough...
I've got to go back out to the shop to verify my timing on the last run, but I believe I had 23 degrees in it at the hit. With the transbrake...
I talked to Malcom for quite a while last winter. He seemed like a strait shooter, and told me everything I asked about. I'm pretty sure the car...
What it is saying is you have two ways to put in a gear retard. 1. Set the programmable gear retards to whatever retard you want in each gear,...
I have been running my 8973 with a transbrake and delay box and it has been working great. I have been using the step 1, launch curve, and run...
Mike is the guy for these ignitions, and is correct, as usual. Some additional info to consider. Yes, the step retards are separate from the...
Ya know those "VERY knowledgeable people" I mentioned? See the three posts above. They, and others, have helped me a ton since I got my car last...
I did my entire dragster chassis, which had been sitting in Oklahoma, with wd40 and scotch brite pads. worked great. On a couple of spots I used...
After messing with my temps for many days because my idle EGTs seemed high, the common advice I got from some of the VERY knowledgeable people on...
Didn't want to hijack anyone, so I started a fresh thread. I've heard some of you knowledgeable guys say that reducing fuel or timing on the...
I've never understood the purpose of the butterfly wheel. Anybody know where it came from, and why? :confused: -Brian
I am hoping you get some responses on this topic as well, since I have some of the same questions. There have been several threads on this...
