Separate names with a comma.
Bryant. It is the only way to go in my opinion.
I always torque my top row (9/16) to 150 and the bottom row to 120 with the billet block. Inside studs get torqued to 60.
I have been using a holley red pump with a NOS fuel solenoid for about 10 years now to prime the motor. I think I've replaced each, one time...
Ditto on Mobil 1 ATF.
The tranny brake on the Lencodrive is electric and the Bruno is air operated. Also the Lencodrive uses the same clutch pack from the planetary...
We use them all the time at the track. They will hold a 3 speed Lencodrive for servicing, or a roots blower hat to manifold.
We've been doing that for years now with no problems.
I did have that problem on each run until we fixed it. I also have a line loc on my brakes run through a switch that I activate right before I go...
I had this problem last year and found one of the retaining pins in the valve body was in backwards. This did not allow one of the pistons to...
On our old dragster we mounted the ACD cylinder on the pedal to reduce the amount of stuff on the motor. However on our current altered we have...
I always wear a chin strap with my HANS device. It works wonders. I had one break on me at the launch and I was looking at the sky not wear I...
Call M/T and order the tires. One is for clutch cars with a stiffer sidewall. You will do nothing but smoke the tires with a lencodrive. I did...
I honestly believe unless you are trying to squeeze every little bit of HP out of a motor you should protect your investment the best you can. I...
I have blow back tubes on my Lencodrive. They mount to the studs holding the bellhousing and run to brackets on the top frame rail.
The best thing to do is run as little wing as you can. I started at 4 degrees on mine and have worked my way up to 10 degrees to keep tire spin...
Actually Sean they do make two tires and I got stuck with the clutch tire last spring. Couldn't get 60 feet with them. Put the other tire on the...
Roar the other thing you have to watch for with the Mickey Thompson tires is they make two versions. One for a converter car and one for a clutch...
I am currently running a 511" blown hemi with Walt Austin heads on it, 8-71 Hi-Helix at 70 over making 42lbs of boost, Enderle 1100 pump, 9.9:1 at...
Randy I couldn't agree with you more. I am so very proud of the performance my family has and what we have accomplished through hard work and...
We only run Michelin truck tires on a 16" wheel on our Performax. Everything else we have used ends up coming apart.
