Separate names with a comma.
in this old video of the lindberg brothers,it looks like they were using them on their pro mod in Europe: [MEDIA] at 0.27s,close up of their heads.
not exactly your combo but i'm running a KB wedge 454 cui blown and alcohol injected,roughly 1400 hp with conservative cam and blower. block is a...
hi! http://www.insidetopalcohol.com/threads/co2-bottle-size.59212/ this thread pretty much answers it all i think. or you can call Bruno Sr,he's...
what about PTC?
thank you for infos Mike!
what CO2 pressure do you run on a 3 speed CS1 lenco? about the Bruno,is the 200 psi pressure for the transbrake a minimum or a pressure i should...
that system allows to free wheel at the finish line and shut off the engine immediately?
so at the finish line am i just supposed to let go off the throttle and then just use my foot/lever brake and parachute to bring the car to a...
jim Oddy's "Black Maria" corvette ran a torsion arm front suspension and a solid mounted rearend. i had an old funny car chassis set up just like...
Thanks a lot Mike!
thanks a lot for infos Mike! this upcoming season being my first use of a bruno/lenco combo,can you give me a little input on the use of the...
hello everybody what size bottle is most commonly used for an air shifted 3 speed lenco and how many passes do you make with it? application is a...
So a fuel head manifold only bolts To fuel heads or are there any "improved" heads it would Bolt To?
This is exactly what i was thinking:the closer the filter To the oil in the pan,the less junk is pushed up the top of the engine by the pump in...
You mean that cone filter was restricting oil flow? Has anyone experienced this problem with a wet sump system? What is the most commonly used...
thanks a lot for input! i'll run the system 1 between pan and pump then.
hi all! using a KB block in a door car,with a P&P wet sump oil pump and moroso pan,i have the following options regarding the oil filter...
along with this:http://www.rbssuperchargers.com/Products/Set_Back_Roots_Blower_Snout_Support_Rod_Set--1400%2D0023
hi all! if i understand everything right,to get the best out of a screw blower,the intake should be purpose built with a specific opening like...
ok,so just setting my blower back,with a rectangular cut in the plate. thank you all for the advice!
