Separate names with a comma.
I thought that the standard down nozzle that fuel cars use is the standard angled deflector. Just "shove the nitro in and let the magic happen"...
I always that fuel cars used the down nozzles because of the volume of fuel being injected. I doubt the down nozzles would make gains for alcohol.
I researched numerous tires at tire replacement time because the imports I had on it had many failures. Most of my tire failures on the imports I...
I was using 720 to make my numbers line up.
Isn't the engine distance further out for Bruno or converter driven dragsters, also 2 spd or 3 spd?
Even on a new build or refresh, I only leave the plugs out and spin it with the oil filter line loose to vent the trapped air in the pump, tighten...
Forgot to add, 3 seconds of cranking builds 120 pounds oil pressure.
I don't do any of that. Been running my KB and Brad hemis for several years, doing nothing for pre-lube other than leaving the magneto off while...
I find that quite a few nostalgia racers are running older versions of the KB block. I personally have tried to get in contact with KB several...
I did the same thing years ago. Coan makes an adapter plate that fits on a hemi block and bolt pattern for chevy bellhousing and has the starter...
Which points box? With a chip or no chip?
The blower throws the fuel to the front of the manifold. That is why I use a set back manifold. Problem solved.
Yes, the Stroud spring launchers I just bought have pilot chutes but no spring in the pilot chute. The chute bag itself is sown into the pilot...
Might sound odd, but how old are the tires? I bought a set of 36" tires for the wheels and thought, what the heck, let's try them. Like putting...
Great! Thanks guys!
I am seeking suggestions for a brand or type of chute launcher, air or spring to replace the standard Stroud chute packs that have the spring...
I have been using the NGK R5671A-10 stock number 5820, which is a silver colored or plated plug. I ran across some NGK R5671A-10 stock number 6239...
According to my data recorder using DS speed and the ET slip MPH, my 34.5 Hoosier tire growth calculated to have grown 3" in diameter at 198 MPH....
Yes, in HALF
I agree if it is a cast iron block. I saw a factory cast iron hemi block that had been bored and sleeved on ONE cylinder. Either they used too big...
