Separate names with a comma.
heavy car and low power compared to what most here run, Im assuming (probably wrongly)this is a door car due to the weight quoted, in a...
with an old old smokey pontiac 706 and 1 small kit which was making about the same power and a 2.60 low 4 speed CS1 and an old steel hays mk 12...
brownjs@shaw.ca Sean Browns email address, he will sort it out for you
well it seems like you have all the answers and you know what you need to do... i dont see why going from a msd8 to a 44 should make a dramatic...
ok when you phased the rotor you just rotated the cap and not the mag body itself to get the phasing spot on at 15 degrees right?? makes more...
im confused what efi do you have ? ok so you set the mag internal trigger at 25 by rotating the mag to get to this point, you then set...
my engine builder who builds high end circit race car engines as well as my twin turbo hemis and is based at Based at Silverstone England ( the F1...
what engine? comp ratio? on the right engine with the right parts and the right fueling 26 is ok way over 20 and in fact up to and over 50
i use the same set up and use an MSD pick up, the big n20 style trigger/damper/wheel with no problems the only time we has a rev/run related...
never had a problem with putting them on exhaust studs just to the chassis iv often wondered ok so the heads only bolted but you just bolt the...
id guess theres a lot of variables but id say the lenco drive would be heavier i have a rossler 3 speed converter flex plate and browell can...
hahaha yeah confusion about the "wide flange" you mean its got spread pan rails, then as you guess tfx is as good a bet as any there are a few...
how wide is the flange my late hemi moroso sumps have a flange about an inch wide
big congrats to you and Kelly, man you must be so happy right now....im speechless which is a first for me ;)
put your crank at the position you want it to fire in on no ! firing stroke then point the rotor arm at no 1 cap/lead turning the mag body...
id reduce that .1 to .070 / 080 for a startdid moran do your map?? did you run the msd 8 on this exact same set up?
we use the basic msd flying magnet on our promag 44 BS3 turbo hemi without problems
winberg or bryant are there premium choices, i just had a repaired crank fail, what left isnt worth talking about, the block wont even...
ERD in canada
well having them both here and weighed them both back to back a good bit equals 3 lbs im sure if you juggled tire /wheel combos you can reduce...
