Separate names with a comma.
Are you guys cooking it to use again at the same event? If you put it in a vented container in your hot enclosed trailer for six days, it comes...
Danny, why don't you get your valve covers o-ringed in the off season. Steve Lanius at Missle Enterprises in Jonesville Michigan has a neat cnc...
Sid Makes The Best Pump. Stronger, Easier To Work On, Easy To Modify,easy To Get Any Part For It, And It Works Darn Well. How Big A Motor? We Use...
Tim, I knew I liked you for some reason. Nitrogen! We've used CO2 for years in liquid form. Liquid expands 1700 its volume when released, so it...
Think maybe we could have 24 inch wide tires and 6.33 gears too? Just funnin'. World Alcohol Racing was fun, and it made sense. Too bad they...
1/8 Mile Would Do Just Fine. Nothing Happens After Hitting High Gear Except The Speed Rush. I Could Forgo That In Favor Of Not Wrecking Parts. We...
4043 is the rod to use: more tin in it keeps the shrink down which causes cracking and stress leaks. Best welder I've found is the Fronius: with...
My question is do they flow any more? Stevie Sanchez wants to modify our V's to a smaller exhaust,(says they'll flow more), but on the dyno at...
More timing doesn't mean more hp/torque.Six to 1 compression and use 52 degrees; 10.6 to 1 and 29 to 31 is all it takes. Remember the low...
We always did ours with four builders squares held tight with vice grips. Can be set up anywhere if you know the stagger. Forward tire touches the...
Brad, save yourself the headaches and make two strips of aluminum to fit. Seal it to the manifold with silver silicone and two screws. Underside...
Thurston, you never wish us good luck. You always just say put more clutch in it when we don't have a clutch! Dream up some tuning tips from your...
Opinions are like a$$holes and mine stinks a little more than.........Stevie Sanchez at Total Flow can make more horsepower and torque than...
I see Frank Hawley's has two TAD frames for dale because the cages aren't high enough for TAD. Is there something we should know about 2008? Are...
We've used Moroso climbing gear lube forever. Our 4.29 MW floater has 93 passes on the gear & you can't tell it from new. (Thank you Lencodrive)...
TRY Attac Race cars in Charlotte, Michigan. 517 543 7211. Chuck Lett. Good Guy. Builds all of Kaleeta's stuff.
Studs into the block at 29 ft./lbs. with 5-30 Mobil 1 on the threads. 125 ft./lbs. when torqueing the heads down, again with 5-30 Mobil 1 or...
When set up correctly the Lencodrive can redlight with the slowest driver. The key word is correctly. It took me 19 months to get Danny Gracia to...
It's about freaking time! NHRAwill be throwing blown cars out with the baby bathwater soon. We need a place to race just like the funnies are...
MIKE, Can I buy your old spark plugs when you finally get them out? I've got a pickup truck too, and it needs a tune. Can't afford new plugs...
