Separate names with a comma.
Having a nightmare trying to get sleeves finish installed to 4.310. Machine shop want to hone once installed but If they come at 4.310 they will...
The search bar above will get you lots of good info. You could cut the cam groove deeper or run external lines but you should be checking lash all...
Yes correct B. You will only get Roger on the phone. He is old school. I got the listed 2.750 but the face to face is 2.425 which is the important...
I just changed out some M main bearings and the ones I took out the lowers had a short taper groove filed either side in line with the uppers full...
I just ordered one and the measurement they want is from rear face that fork touches to the front face of bearing. Remember you need 3/8 to 1/2...
Thanks. I assumed notching the bellhousing would ruin the cert. Yes Im not removing clutch every run just resetting to zero.
How do you torque the clutch stand nuts with the bellhousing on? With the inspection cover removed I can't line up any to get a straight shot with...
new car to me but it has gone down the track fine from an outside visual perspective. i now see the left front is 1/2 further out too so i have to...
Yes crank CL is centered.
No I'm not rushing anything. There may be a good reason the right rear wheel is 1/2 further out than the left. I just don't know what it is.
Checked pinion center to wheel face and its the same
This not rear steer. Its dead straight only the right wheel mounting face is half inch further out
I'm measuring from the mounting plate to the end face of floater hub where the caliper mount bolts on. 4 inches left side 4 1/2 right side....
Its square in the car. Its a fabricated steel unit. When they welded on the floater ends the right side is 1/2 inch longer. Just checking to see...
is there any good reason why a rear axle would be offset 1/2 to the right side on a funny car?
They recently moved but are still in business thankfully.
emailed a request a few days ago. did not get a response and sale ends today ?
Emailed you on the Hans and some plugs. Thanks
shopping for a helmet. What's good now. I had an impact nitro 10 years ago. I don't see any in the classified section? Thanks
ive been out the loop. What's the current best MT slick for beadlock clutch fc. Who sells them on the west coast? Thanks
