Separate names with a comma.
Need some help getting this thing into the 3's. 260" wheelbase, 1900 lbs, 402 sbc with 14-71 HH Littlefield, 20% over making 35 lbs, Gerardot...
Its now on EBAY without the probes
sbc Where did you find info on a bore that size? Got to believe the bore spacing is moved so much what heads fit that? I love sbc's and would...
60 ft 60 ft is part of our problem, we are only 1.01's. Pulling 10 degrees timing at the hit and putting it back in over 1.5 secs. Then changed...
Trans gear 1.76 Powerglide
402 sbc with 14-71, 20 od, 37 lbs boost, 34.5 Hoosiers, 4.10 gears in a dragster. 5000 rpm on the trans brake. At the release of brake, our rpm...
Our crank is a Callies and it does have the double keys with the BB snout. We don't run a damper either and even with the raised cam block, we...
Need to lower compression to the 10 or 11:1 range, change timing chain to gear drive, some killer valve springs for the higher pressures, biggest...
Video Nice job on the car and the video! What software did you use to make the video?
We are new to blowers but not to using air throttles. Using Gerodots upright injector. Set the air throttle to partly open the throttle(burnout...
Does anyone know if lowering the front of the motor so the pinion angle on a rigid dragster is slightly negative, will enhance traction? I know...
Thanks for the idea!
Does it matter which way you mount the top pulley on the snout? I'm told the cupped end should be over the snout but to get more setback, I would...
It all depends on how hard you push them. We ran the last two years on the same set of GRP's, over 300 passes of bracket racing(mostly 1/4 passes,...
