Separate names with a comma.
I ran a 451 bae with fathead 5's a couple of years ago with a 1671 hh retro, without different rod lengths it used to beat up cyl 1 and 2 , then i...
Hi Guys We tested the heads here in australia on our alcohol dragster for the guys at NRE for 12 months before they went on sale, Jamie the owner...
could it be possible that there is a bad batch of belts, i know of two cars here in australia, both blown alcohol f/c with between 100 and 125...
in theory it shouldnt matter, the tang is only there to locate the bearing while installing it, so it doesnt move forward or back when you tighten...
I have had this problem also, i had 35-40 runs on a set of leads in a TAD so i changed them out and the problem went away, i now change my leads...
i have to agree that does seem way over clutched, i know a guy who runs a 9" triple in a legal pro mod car and another who uses a dual 10.5 in an...
i run a 24t on a normal rootes, but i had a 23t pulley made for a psi mini snout
I was running 14mm on my screw blown hemi at 88 over, we turn our engine to 10500 all the time, the belts were not lasting they threw chunks of...
usps is great ,go for the 3-5 day option , its not to expensive and very fast just make sure you put some kind of invoice with the parcel or it...
my packet of arp L19 flywheel bolts had a little instruction sheet that said 150ft/lbs with arp lube
my main concern is the small undercut where the liner steps down in size half way down, it will only leave 0.030" of wall thickness in that...
anyone, someone must have some idea how big you can go
Im running 4.467" bore in my BAE billet block , has anyone tried to run these block and liners at 4.500"
on our alcohol dragster i just use an LED autometer light, with an msd magneto rpm activated switch, just plug in a 2 step where the chip would...
most teams carry an alloy floor jack around with them,so if you are doing it with the motor in the car while its up on stands, use the jack and...
i just use the small cone shape filter that goes on the front of the barrel valve before you fit the main line, it is suprising the amount of...
I run an alcohol dragster here in australia,its a 471ci BAE block with NRE fatehads and a psi d we turn it to 10500 all the time, i use the cam fx...
In a car with a clutch maybe it actually reduces the power slightly and stops the motor driving through the clutch allowing more power to actually...
I ran a system 1 dry sump pump on my alcohol dragster 451ci fathead psi etc, it did help bearing life and made the oil pressure more stable, but i...
I have been meaning to do a similar test bob but with a conrod and put it in an oven, i have been told that the tunnel size would get larger but i...
