Separate names with a comma.
I run a little more cam, same or more rpm, maybe less boost (you said 33 and 43 in different posts, which by the way, is a badass blower for 14%...
I totally respect you’re abilities and experience but I gotta completely disagree based on my experiences. On a normal tuneup I can read a plug...
You guys were talking about using a step retard to adjust main timing. You know you can just adjust main timing in a separate window in the grid...
I didn't have your power, but when I decided to get after mine I was reminded of Garlits old saying: wheelies are just a lack of power. If I got...
I have an old TAD tank. Nice looking but did as you described, although the geometry is a little different on mine. I plugged the existing rear...
If you're not filling your puke tank then you're missing something. You're moving oil from a volume that should be at atmospheric pressure into...
I would lean the idle a little and keep looking. What about burnout and stage? Somebody was on here awhile ago talking about hurting pistons in...
If I idled my BBC at 450 it wouldn't have any rings left either. It seems to me chevys (conventional at least) like to idle hotter than Hemis....
I'm pretty rough on my stuff but have never ended up with oily plugs. What kind of 2nd ring are you running? What tension oil ring? How much...
Call them up and talk to Chip. He will shoot you straight on what they're capable of and who has run them.
4 link is now neutral with no rear steer. Wheelie bars are 3/8 lower on right side (was ~3/4). I didn't move any bars but finally measured the...
More good advice. I was able to straighten the car out with the wheelie bars with the way the car was but it was a nightmare down track. I...
I had a 110 pump on a stock iron headed BBC street motor with hillborn stacks. My first guess at a fuel system was so rich at WOT that it would...
Thanks guys, great feedback. Struts are fixed and revalved. It's a diagonal link, no wishbone. I put 1 flat of preload in it (top right...
Wannabe promod: roots blown BBC, pg 1.80, 4.10, 34.5, 2450 lbs wet. Car was untameable with a bad strut and 3 flats of negative preload. Lots...
Volume shouldn't change boost. If it flows a bunch better maybe you see a small change. Can't say I have direct experience with the change,...
I remember the story now. Pretty sure SSI has a blower dyno. I'm thinking they know exactly how much power it takes to spin theirs vs a PSI and...
SSI had one at PRI 2017 I think it was. Said it was ready to go but they were arguing with sfi about the cert process. Something like sfi wanted...
I have for years been wanting to build a programmable wheelie bar. I'm honestly surprised nobody has done it
.005 or .006 seems pretty close for an average setup. On my 8mm stuff .004 per tooth works well in small windows. For big swings I usually go...
