Separate names with a comma.
As far as setting phase once you get the crank trigger style crab cap on there, mark the outside bottom of the cap under the #1 terminal and then...
Can you move things around so that you don’t puke oil on the tires? I would have wrecked every car I ever put a blower motor in if my puke tank...
If I’m on the chip at 4000 rpm, the next spark plug will fire less than .003 after button release. As the motor accelerates, this time goes down....
Not sure I understand? With his current timing curve, the timing is out while he’s on the brake. But I think you’re saying that after he puts...
Those rotor speeds speeds sound pretty low for a hh roots in general. I was told by the previous owner that my SSI F3 is set up to go 13+. I’ve...
Typically I’m phased around 24, base timing at 28-31. I’ve gone down as low as 13 or maybe 12 degrees for a couple ticks (11-12 degrees out of...
A friend of mine found the cups burnt up less often. Said they tend to hold oil vs the ball.
Nice one in TN. 11,950 with mini snout. I can get you the phone number.
6.30s @ 2000 lbs here with a 7al2, ngk 10s gapped at .015. Never any sign of a problem. I put a new blower on once and shoved way too much fuel...
I think JR1 has 70w available now. I run the 50w and love how it will not absorb alkywater.
Sure, the base and the strap move together. The strap would have to move independent of the base to say that the strap shows timing. It doesn’t....
Pictures to prove it? I’ve seen a lot of plugs, never saw a ground strap on blown alcohol that actually responded to timing changes. The whole...
20-22 degrees on a blown alcohol spreadport Chevy is pretty standard. Just like on nitrous, a conventional bbc head wants between 6 and 10...
I have no clue about a hemi. I do think I have been faster on a 110 pump than most. If you have real data on a conventional bbc (115-125cc) I’m...
You want to run a conventional head bbc at 22 degrees timing??!!!?? Won’t fall out of a tree.
I’m not sure how much experience the cam companies have with a high effort BBC with a decent flow rate cylinder head. I have heard multiple...
Ya, I run 285/310 or thereabouts. You said you were going 290 on the intake, which is more than I’ve heard of, but I have no clue if it works....
You might have trouble finding an existing lobe profile with long duration and relatively short lift. Why not get the net lift up higher and...
Fowler was well under 500 total out the door but that was a couple years ago
SS intakes and inconel exh. SS would only last 10 runs on the exh. I’ve had a few different cams, forget exactly which one I’m running now, but...
