Separate names with a comma.
Glad it’s working better. I’d still be tempted to drill a hole in the blade, especially if it’s thick enough to put a 1/16 npt plug back in it if...
The EFI nozzle with power applied should be the same as having a non-aerated MFI nozzle installed. There is no “fighting” because here is no Efi...
Ok, I’m with you on the plumbing except I think that the poppet on the BV in this configuration is now a pump saver and needs a poppet at ~100+ psi?
The chip at idle makes sense. There are guys running gas primers that way in alky bracket cars. I might unplug 4 injectors first as a quick look...
Plenty of cars running mechanical pumps and efi without problem. I don’t see any way they are making 45 psi at idle
You mention secondary bypass at 2 psi. It seems like you’d be referring to the main poppet but I’m confused why you called it secondary? I’m...
Will, I was in a hurry when I stopped by with the pump. Mike said based on it being very old and the flow numbers, toss it. Actually, if you...
Great feedback. What engine rpm? Did you ever run it at lower od?
Just bench racing a little. Any experts on std helix blowers on here? Curious what anybody had made on a Max (ish) effort blown alcohol with a...
I had the pump flowed at alky digger. Original tag when I got it used was 15.1 Flowed 13.8 I think their bench is a little on the low side....
I’ve had an interesting deal happen on our injected car. The last couple times I had the fuel system cracked for some reason, the pump “air...
Left side looks similar, probably 1/4 second behind in going nuclear. 3 of 4 chambers caved in about to give out. Orings pushed out. #5 was...
Whole right bank. Left bank still runs, lol. If the left bank is unhurt when I pull that head I will be really lost. The chambers are...
Distribution feeds both sides. Two chambers on this set of heads was fixed previously. Pretty sure the one that DIDNT burn through had a...
I forgot to mention, I didn’t know it was hurt until at home the next weekend when I tried to fire it up. I hadn’t looked at the grid and was...
https://m.facebook.com/story.php?story_fbid=3720093038016295&id=100000469055216&ref=bookmarks
Pushed out the orings and tried to extrude the gasket. Outside of the gasket stayed clamped though. I’ll try to post a link to pictures.
To clarify, chambers aren’t “dinged up” like dropping a valve or something. More like you put a body dolly on the quench pad and then took a...
Pistons appear to be fine. Short block seems fine although I expect the bearings will be best to death when I get to them. Actually still kind...
Roots MFI BBC set up on about 1800 hp. Right side head is annhiated. Every quench pad is caved in as if hit with a sledgehammer and 3 of the 4...
