Separate names with a comma.
326” LS. stock coil on plug. Same basic motor made about 1500 hp with a turbo on top. Ive verified timing all the way to 7000 rpm, but it could...
Take a 1000 hp to spin? kobelco 14-71 std helix with minor dmpe mods. At 20 over it should be moving 1500 hp worth of air and making 40 psi of...
Can you take the output off of the pump sizer to see if it’s cracking at idle? I think it’s possible if it’s right on the pump outlet. also,...
Nope. Not true at all. This blower is loose, but im not sure that even matters. The motor will spin the blower Without the belt on. I know...
The blower belt is the damper…. so how long could I safely run without it? The guy helping me with my Haltech box tells me to put a 4 magnet MSD...
Probably wouldn’t fail, but it won’t report over 30 so not much use if you’re at 38. I’ve seen multiple instances where a cheap boost...
https://www.holley.com/products/ignition/ignition_boxes/power_grid_modules_and_accessories/parts/7763 If you’re under 30 psi you can use the 7762...
I ran dart and Merlin 3. 4.500 up to 4.61 bore. 3.8 up to 4.375 stroke. Went 226 mph at 2050 lbs. guessing that’s north of 1800 hp. All of...
Robert, that’s the only option I don’t have coming right now, but maybe I should try that too. How much to have it in TN by Friday??
I need a flying magnet trigger wheel for a blower pulley. Preferably about 7.6” diameter. Does anybody make something like this?
I ran manleys and ferreas in my conventional big blocks at 8400. Exhaust valves would start leaking in 20 passes on a conservative tuneup or...
Mike, I appreciate your time. I’ll report back after I get it set up in case I can help anyone else in the future.
Interesting that you say that about the pump. What is the benefit of a smaller or slower pump vs using a pump sizer loop? Too much turbulence in...
FIE 326 Chevy
I don’t know if this thing is weird because it’s so small or what. I’d never paid much attention to port opening point before I realized that’s...
Doesn’t work that way. You don’t even know the motor size, you can’t possibly guess at gpms. When somebody flows a complete system, how do...
Teeny tiny
Mike, I’ve set up multiple systems. Never had a problem. This one threw me for a loop. Afr was dead steady on the converter. At this point...
Mike, I set it up around 140 at first. Fought ignition issues. Got them fixed and put a pressure transducer in the port distro block. Knocked...
Thanks for the feedback. I checked the shutoff with shop air. Air goes where it’s supposed to. The notch on the pump is on the right if the pump...
