Separate names with a comma.
Absolutely DO NOT use vacuum. It can, and will, ignite in the shop vac. Use the blower side (i.e. blow into the valve cover). An air mattress...
Eric Luzinski, EZ Motorsports Orlando Florida:231-392-6966.
Using the rate of 183 miles in 60 minutes, converted to 11594880 inches in 3600 seconds, 17 inches would be traveled in .0052782 seconds so...
I had a conversation with Tommy this afternoon and have his permission to share this information. He is in the new shop and is still un-packing,...
Trevor, Think of that type of multiplier as a planetary type drive. The 1/2" input is for your torque wrench, the 3/4" output is for your...
Mark, The recording says they are in the process of moving to another location, and gives two numbers for emergency contacts. If you hear from...
Contact Gregory Whitney in Arizona whitney.gm@gmail.com. He will sell you a starter complete ready to go or sell you one right off the airplane...
Had the same issue when mounted to blower, Autometer liquid filled and would knock the needle off. I called and asked if they would consider a...
Dave, I've been very happy with my -20 RJS 2 piece. And....no games when they re-cert. Steve K.
Rob, CMW Inc. now owns that heavy metal division of Mallory. Call them, 317-634-8884, and ask for Brad Schum. They have several sizes and...
Like Dave said, an alky motor direct drive will be tough to get it out of the hole. You'd think you could slip the clutch to keep from pulling...
I have a -20 RJS and am very happy with it. They re-certed it last year no problem. Same with their belts. Excellent customer service. Steve K.
Old School, might not be as bad as you think. I've run two 10's in mine from the git go; 214" 1969 MW. I was able to put them side by side about...
#6 cracked through on both sides and halfway up bore on one side. Crack appears to originate on side of rod toward camshaft. I've not seen signs...
Anybody ever seen a rod try to split through the thickness? I have (6) C&A 250 rods that, in varying degrees, have cracks originating in the...
Any new info? Is C&A going to re-open under new mgmt? Guys that might have to switch-whose rods are you going to use? Thanks, Steve
Guys that are running solid plug wires on hemis, what brand are you using? I'm sick of having the terminal pull off the boot on Mallory 787 pro...
I'm not a kinetics engineer, but I can't believe that any drag strip has the capacity to safely stop a car traveling 250 MPH at the top end....
Kyle, I have a setup like Art described, except I have a flow control valve in the feed line. If you are coming to Indy this weekend for Goodguys...
WJ, I had to retire my -20 RJS suit (5) years ago. Bought a new one from them......difference between old heavy suit and new light one is like...
