Separate names with a comma.
I picked up a little 12 volt fresh air system with a cotton style air filter. It works perfectly to de-fog. And when it is filthy hot and dry,...
I am not a genius when it comes to injected BBC's on alcohol, but I have a dyno, and that helps. Plus, I have probably done 20 in the last few...
The big deal is going to be the cylinder head. Alcohol likes a fair bit of timing. I have never had 32 do anything on my dyno with a standard...
Do yourself and the world a favor and call Mike (or one of the other guys) over at B&J. They are the ones that have the rights to make them, and...
Happens all the time. You can solder the vents closed and drill small vent holes as needed. But the easy way to do it is take a small lengths of...
It certainly is a phenomenon unique to these cars. I couldn't really tell what was going on at first. My car did not start to do it until I...
Randy, does the high pressure in the drivers compartment 'push' the hatch open, or the giant low pressure void coming behind the vault of the air...
I have two. And good luck prying them from my cold, dead hands. As I see it, it is the best of all of the others.
That is enough for the rules. It should be enough. Just watch it closely for a launch or two. It may get close to scraping depending on how...
FIVE?!!! Holy crap! That is like big block numbers. With a world block and vic heads, I say right at 2.8-3 thou. But one way to check is get...
Dart/aftermarket block, or standard? What heads? But an average is going to be around 2 1/2 to 3 thou growth. So just subtract three from what...
Yeah, gotta know a little better of what you are looking to run. If you want to run a BBC and a top dragster or altered type of deal, you can buy...
I am not a trans guy. That is the only thing on the car that I don't do myself. I tried to run with a glide and just got tired of pulling them...
I really wish I could help. The only thing we found is that our solid mount funny cars absolutley hate tires created for suspension cars. We...
Yes, there is an advantage. You can go leaner without hurting the power and also it helps a bit on the durability of the piston. (But I have...
I had to make my own. But they may be available; Mick Snyder is the distributor of lencodrives, and one of the most successful guys to ever...
Crower makes some great stuff. I wouldn't fear it.
An "H" on one side that grabs the back body latch with wheels on the botton. An "H" in the front that suspends where the front engine mounts are...
Here is what I know. The valvoline VR-1 that we all fell in love with a few years ago because it was available at checker, and it made more power...
I can go measure at the shop tonight if no one has the measurement here. I have two or three laying around. All of mine are three speeds, but...
