Separate names with a comma.
Yes you can use a 2 step with an automatic. I was wondering what rpm the converters they're running would hold one to without one. Marty
Something to think about. A 2:1 torque multiplier is like a 50% gearset, the rest of the gears x 1.5. A typical torque converter is a 2.5:1 torque...
What kind of rpm can you get out of these newer blown alky converters ( Coan , Chance or Cameron )up against the hand or foot brake?compared to...
how much weight? what tire ? how much blower ? Youll probably need a 56% to have enough gear ratio to leave but its going to tug it down pretty...
The question I was really asking is if anyone knows the shim thickness to rpm and if it will still work at lower rpms like 6500 . I'm sure its a...
Whats the lowest rpm a psi rev limiter can be set for? Could I stack them and switch one with the clutch pedal set at 6000 for the launch?
Plug the holes in the valley and put one return in the valley and three in the pan. Marty
Even that 28 was 2640 feet There is more in it
And it looks like the front tire never turn, like in a bind or something. Marty
I just watched Les's video . :D:D:D:D: Hey Chris Drive To Win
I cant tell you the exact number. I think like .0015-.002 but when you put the valve in with the head upside down it should fall down to the seat...
Now your going to have four. The cheap 10w/30
I think if you check the straightness of the rod bolts on a set of rods out of a screw blown motor with 15-20 runs on them you will find some bent.
Back around 2000 I went to Virginia to watch a test session Jim bolted his 1471hh to at least three pro stock motors they hauled ass!!! He had...
I believe 37hemi has the problem solved. It is fairly common to tighten the right rear springs spanner 1/2" to 3/4" more than the left this helps...
The cross weights were backwards. the right to left front and rear weights.
the plug fires if you try to start a cold engine on alcohol it will not start because theres no vapor ( alcohol boils at 150 degrees) my chevy...
Isnt it closer to 3.2:1 afr for high boost 50+psi supercharged methanol. Ive seen they make big power with .400 bsfc numbers and 10:1 afr on...
A points mag for a nitro motor is wound different than an alcohol motor because the nitro motor needs a long duration spark you would probably use...
You can intermix them.for instense;all 25%'s (1.25ratio) are fine spline. I had a 2.19 low 4 speed. The reverser input shaft and the rear 25%...
