Separate names with a comma.
I was thinking of having my piston pins coated... Any info would great.
deck hight Look at what is the latest and greatest = Big Bore short stroke= higher rpms = better for limited O/D.
I would not run it with a 1 gal fuel cell in the front... you will need at least a 3 gal in the front... I ran a simular set up a while back. had...
fuel filter System 1 Between the pump and BV #10 line... Have one for years with roots, screw and pro charger EFI... all in the 6's without a...
3.57 to the 1/8 3.57 to the 1/8... I a ADRL car = No rules and I belive it's @ 2200 lbs... Everything that can be Titanium is or other light...
camara First you need to figure out what you want to use the camera for? I was looking for a long time to pick one up. The most important thing...
Small Block we ran a sbc 50lbs of boost, roots, with a 8 box and a 7531, all bell you want and then some... we switched to a BBC with roots 40lbs...
spring It has to do with the weight of the valves, rpm and boost... We run bbc with ty valves @440 on the intake and 380-400 exhaust (one...
Heat gun You can also try one of these... Test different parts of eng, trans, tc ect $49...
Vacuum Pump Lonnie Houde Performance had a vac pump on Scott (Name) Screw Blown GTO that worked well. maybe look him up, he can help you.
10.5 You are in the ball park... What is the weght of your truck... keep putting more untill you cant hook it or over-rev at finish line.
Breather this will work - http://www.petersonfluidsys.com/engine_breath.html
Vac pump Star makes a great pump. http://www.starvacuumpumps.com/catalog/pumps/
OIL Pump http://www.daileyengineering.com/dailey_engineering_home.htm We run a Dailey pump... Roots and Screw BBC
Would it be possible to pin the main bearings in a aluminum/billet block? Good or Bad idea??? Same as the connecting rod bearings… Has anybody...
rings I orderd a full set of rings with the 2nd gapless ring "Z"
I was searching for gapless rings other then Total Seal and came across Bruce Walker http://bwepistonrings.com , he worked for C&A… I will try his...
blower I had a BDS 14/71 ProCharger, Littlefield used to service it, if you call them i'm sure they will help you.. Or call Bill at Oddy's...
Sparco Thanks to all for your sugestions. We got an awsome deal on a SPARCO -20 suit. Thanks to http://www.biondoracing.com/ Spoke to Pete, he...
Cooling The best way to cool it is reverse flow cooling. put in water from the rad to the heads and take it out from the w/p. or if the block is...
